Table of Contents
Advertisement
Quick Links
OPERATION
• ON/OFF: The unit is shipped in the OFF position. Locate the ON/OFF switch on the
bottom of the unit and slide it into the ON position. In the ON position, the solar cell
will light up automatically at night and will shut OFF automatically when the solar
panel is exposed to daylight.
• Location: Select a sunny location, charge for at least a day to fully charge the
battery. The more direct sunlight your new solar light is exposed to during the day,
the longer the light will operated in the evening. After charging (charge for at least 8
hours in direct sunlight), the LED light will light up automatically at night.
Step 1:
Place solar unit (C) into cylinder (D) by turning it to
the right until firmly tightened.
Assembly Instructions
Spinner (2)
Top Pole
Step 2:
Insert spinner (A) into cylinder (D) by inserting into
opening.
Nut (2)
Solar Unit
F
Middle Pole
Cylinder
G
Stake Base
Advertisement
Table of Contents
Summary of Contents for exhart 13472
- Page 1 Assembly Instructions Spinner (2) Nut (2) Solar Unit Cylinder Top Pole Middle Pole Stake Base OPERATION • ON/OFF: The unit is shipped in the OFF position. Locate the ON/OFF switch on the bottom of the unit and slide it into the ON position. In the ON position, the solar cell will light up automatically at night and will shut OFF automatically when the solar panel is exposed to daylight.
- Page 2 Step 3: Step 4: Attach nut (B) to spinner (A) (result of step 2) by Repeat steps 2 & 3 to attach the other spinner and nut. turning it to the right until firmly tightened. Step 5: Step 6: Attach top pole (E) into cylinder (D) (result of step 4) Attach middle pole (F) into top pole (E) (result of step by turning it to the right until firmly tightened.
Need help?
Do you have a question about the 13472 and is the answer not in the manual?
Questions and answers