Subscribe to Our Youtube Channel
Related Manuals for RIUKOE PL-TW006
Summary of Contents for RIUKOE PL-TW006
- Page 1 Battery | IR Remote | APP Control LED UP-LIGHT PL-TW006 User Manual KEEP THIS MANUAL FOR FUTURE NEED...
-
Page 2: Table Of Contents
STATEMENT ACCESSORIES SAFETY INSTRUCTION UNDERSTANDING DMX TECHNICAL SPECIFICATION CONTROL SYSTEM CLEANING AND MAINTENANCE... -
Page 3: Statement
STATEMENT product well capability intact packing when leave factory. All of the user should comply with warning item and manual, any misuse cause of the damages are not included in our guarantee, and also cannot be responsible for any malfunction & problem owing to ignore the manual. - Page 4 user, be sure that they also receive this instruction booklet. • For proper operation, follow the Installation guidelines described in this manual. Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts (brackets) included with this fixture should be used for installation.
- Page 5 • Ensure ALL connections and end caps are properly sealed with a dielectric grease (available at most electrical suppliers) to prevent water corrosion and/or electrical short circuit. During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture.
-
Page 6: Understanding Dmx
C A U T I O N S • For added protection, mount the fixture in areas outside walking paths, seating areas, or in areas were unauthorized personnel might reach the fixture. • Min/Max ambient operating temperature for this fixture is 5°F to 113°F (- 15°C to 45°C). - Page 7 DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX allows all makes and models of different manufactures to be linked together and operate from a single controller. This is possible as long as all the fixtures and the controller are DMX compliant.
-
Page 8: Technical Specification
channel will only affect the selected fixture. In the case of the up-light, when in the 10 Channel Mode you should set the starting DMX address of the first unit to 1, the second unit to 11 (1 + 10), the third unit to 21 (11 + 10), and so on. - Page 9 Control DMX Channel: 6/10 Channel Control Modes: DMX/Wifi App/ IR remote/ Wireless/auto run/master slave/ Sound control FEATURES • DMX512 control，by dmx cables or 2.4G wireless mode • Master-slave mode, by dmx cables or 2.4G wireless mode • Mobile WiFi control,support Android 2.3 version or above，Apple iOS 4.3 or above) •...
-
Page 10: Control System
open or close CONTROL SYSTEM 1.MENU Menu Item1 Item2 Item3 "Choose Pattern" "Static" (Color) (Dimming) 0-255 GREEN 0-255 BLUE 0-255 WHITE 0-255 AMBER 0-255 PURPLE 0-255 STROBE 0-20 "Macro" 1-32 (Speed) "Show" "AUTO" 0-20 "FADE" 0-20 "SNAP" 0-20 "R-STRO" 0-20 "G-STRO"... - Page 11 (Mode) " Slave" " WiFi" WiFi Icon "System Settings" "1.white Balance" (Color) (Brightness) 127-255 GREEN 127-255 BLUE 127-255 WHITE 127-255 AMBER 127-255 PURPLE 127-255 "2.Show Battery Icon" YES/NO "3.Display Sleep" Open/5Sec/ 10Sec/15Sec "4.Autolock" YES/NO "5.FAN Control" Auto/High/ Medium/Low "6.Infrared Setting" ON/OFF "7.Wireless Setting"...
- Page 12 MENU Main Menu Function Select / Exit submenu Select the previous menu / parameter increment DOWN Select the next menu / parameter to decrease ENTER Confirm the selected function / Go to the next level menu 1.2 Method of control To select a pre-set function，press MENU ，enter main menu，The display will display the corresponding menu function ，...
- Page 13 If you press the ENTER or MENU button, the display will exit to the previous menu mode. “Slave” mode Choose “Slave”，press ENTER，display “OK!”. Indicates that the status of the slave receiver has been entered. After selecting, the parameter will be saved automatically ，...
- Page 14 perform the same action. 4.WIFI control Step 1: Download the LedHome App. 1.1 IOS(Apple) System Open App Store, then search the LedHome 1.2 Android system Open Google Play Store, then search the LedHome Step 2: Setting the Wifi “User Settings” interface，press ENTER，use UP/DOWN to “...
- Page 15 Open the phone settings function, find the wireless and network WLAN items, connect the name of LED_xxx equipment, as shown pics belows： When the connection is successful, exit the phone function settings, open the LedHome application software，For the first time you need to add a scene, select "Entertainment"，And then select the direct control, there will be color ring control interface, this time can be the appropriate mode of operation.
- Page 16 10 CHANNEL MODE Value Function 0~255 Dimming, number 9 channels(0~9) Strobe off 10~255 Strobe：10 the slowest，255 the fastest 0~255 Red,The maximum value determined by ch1 dimming 0~255 Green,The maximum value determined by ch1 dimming 0~255 Blue,The maximum value determined by ch1 dimming 0~255 White,The maximum value determined by ch1 dimming 0~255...
- Page 17 CLEANING AND MAINTENANCE CLEANING Frequent cleaning is recommended to insure proper function, optimized light output, and an extended life. The frequency of cleaning depends on the environment in which the fixture operates: damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture’s optics. •...
- Page 18 person(s). • Inspect all moving parts and make sure there are no signs of wear and rotate/move without imbalances. • Electric power supply cables must not show any damage, material fatigue or sediments. Never remove the ground prong from the power cable.
- Page 19 Factroy: No.31 Zhongxing Road Baiyun District Guangzhou,China +86-20-2904 6476 info@ricostagelight.com YouTube www.riukoe.com Facebook...
Need help?
Do you have a question about the PL-TW006 and is the answer not in the manual?
Questions and answers