Advertisement
App interface
No.
Name
1
Settings
2
Resolution
3
Battery
4
White balance
5
Wi-Fi signal
6
Shutter
7
Album
8
Mode selection
Charging
1. Connect the magnetic end of the magnetic charging cable to the magnetic charging
port.
2. Plug the USB end of the cable into an adapter and plug the adapter into a wall
outlet.
3. Turn on the wall outlet and the camera will begin charging.
A red LED will illuminate when the camera is charging. A full charge typically takes around
two hours. Following a full charge, the red LED will turn off.
2
4
7
Description
Used to adjust the various camera settings
Displays the resolution photos/videos are taken.
When in video mode, it will also show the remaining time
available to film until storage is full.
Shows the battery level
Used to adjust the white balance
Displays the strength of the Wi-Fi connection from your phone
or tablet
Tap to take photos, and to start/stop recording video
Tapping shows all photos and videos captured by the camera
Used to switch between photo, timed photo, and video mode
1
3
5
6
8
Advertisement
