Subscribe to Our Youtube Channel
Related Manuals for Beta Three TQ-22
Summary of Contents for Beta Three TQ-22
- Page 1 Digital mixer Reference man ual TQ-22 DIGITAL LIVE SOUND CONSOLE Applicable to : Firmware Version 2.2...
- Page 2 TQ-22 Mixer Reference manual UG-TQ22-EN (V2.2-211226)
- Page 3 TQ-22 Mixer Reference manual Before installation, operation and maintenance of this product, Please make sure to firstly read the [ Important Safety Information ] on page I of this Manual. Revision history Revision Revision description and content updated Initial version V1.0...
-
Page 4: Symbols Used In This Manual
TQ-22 Mixer Reference manual Symbols used in this Manual The following symbols are used for explanations on limiting, warning and prompt in operation and instructions so as to ensure safety: The purpose of the excalmatory mark in an equilateral triangle is to remind the user of paying attention to the important safety, operation and maintenance instructions existing in the Manual. -
Page 5: Repair And Maintenance
TQ-22 Mixer Reference manual Repair and Maintenance This equipment belongs to precision electronic products, requiring a special maintenance and repair method. In order to avoid equipment spoilage, personal injury and /or add potential safety hazards, all the maintenance and repair of the equipment must be undertaken by the authorized service station or distributor. -
Page 6: Packing Content Of Tq-22 Mixer
TQ-22 Mixer Reference manual Packing content of TQ-22 Mixer TQ-22 Main Unit 1pcs 1pcs ( Not including tablet ) AC power cord WIFI wireless adapter Bluetooth adapter 1pcs 1pcs ( USB interface ) ( USB interface ) User’s 1pcs reference manual UG-TQ22-EN (V2.2-211226) -
Page 7: Table Of Contents
1.4. Recall a preset scene and easily restore the required working parameters 1.5. Use Presets to tune 1.6. Monitor headphone 1.7. Restrictions on USB interface power Chapter 2 Detailed Description of TQ-22 2.1. Input Channels 2.1.1. Home of the input channels 2.1.2. Overview of input channels 2.1.3. - Page 8 TQ-22 Mixer Reference manual Content (continued ) 2.3. Route assignment operation 2.4. Effect processor 2.4.1. TAP of effect 2.4.2. Signal Chain of FX 2.4.3. Add effect 2.4.4. Chorus effect 2.4.5. Echo effect 2.4.6. Flanger effect 2.4.7. Pitch-Shift effect 2.4.8. Reverb effect 2.4.9.
-
Page 9: Chapter 1 Tq-22 Quick Start
TQ-22 1.2. About the TQ-22 mixer Professional field tuners often require four-band parametric frequency equalization ( PEQ ) , high-pass filter ( HPF ), compressor ( COMP ) and noise gate ( GATE ) on each input. They often use more high-quality digital effect processors at the same time. -
Page 10: Main Features
TQ-22 Mixer Reference manual 1.2.1. Main features With the digital signal processors ( DSP ) of the fourth generation ( SIMD core ), precise 450MHz / 40bit floating-point mathematical operation,24bit /48KHz high performance ADC / DAC, Concerned about the details of the sound you care about, showing a rich sound content. - Page 11 USB port ( including MCU programs ), ensuring that the mixer you purchased will be readily and completely upgraded to the latest state. TQ-22 mixer provides Wireless WiFi hot spot, the IOS device ( Apple iPad etc. ) can be wirelessly ...
-
Page 12: Introduction Of Front Panel Functions
TQ-22 Mixer Reference manual 1.2.2. Introduction of front panel functions 18 19 Channel control area, including: (1). Channel When the routing button number is selected, guide screen, used to display key information of this fader and button are used as the volume and the channel, such as channel name, volume, etc. - Page 13 TQ-22 Mixer Reference manua Introduction of front panel functions (continued) Volume send knob. Send the selected input channel to PEQ control: buttons [1] ~ [4] are used to select the output bus. The four knobs correspond to the four frequency bands, which correspond to BAND1 ~ buses, and the button lights of the corresponding BAND4 respectively.
-
Page 14: Introduction Of Rear Panel Functions
TQ-22 Mixer Reference manual 1.2.3. Introduction of rear panel functions 16-channel MIC / LINE differential balanced input Analog stereo input, single-ended signal input, ( XLR female plug and 1/4 " TRS combined input 1/4 " TRS interface or RCA socket. -
Page 15: Tip Wizard For Quick Start
1.3. Tip wizard for quick start You can have a quick start Connect TQ-22 mixer with Mics, Music instruments, amps etc. Turn on the power of TQ-22, wait for start of the unit, normally it will take around 25 seconds. In the navigation zone ，you can select the input / output channels，... -
Page 16: Recall A Preset Scene And Easily Restore The Required Working Parameters
TQ-22 of the scene. TQ-22 digital mixer includes a lot of preset scenes to be used in all kinds of performance occasions. In allusion to the performance that you will tune for, you can find the most suitable scene. ( Refer to Paragraph 2.8 for details ) You will see a lot of scenes by manufacturer or by the user, choose one and single click [ Recall ]. -
Page 17: Monitor Headphone
TQ-22 Mixer Reference manua 1.6. Monitor headphone On the panel turn ， the system will pop up the Solo setup， the user can setup specs, view the headphone output level, also you can clear Solo which is clear all monitor. -
Page 18: Chapter 2 Detailed Description Of
Chapter 2 Detailed Description of TQ-22 This section details the screen and operational controls of the TQ-22 Digital Mixer. The operation of this tuning station basically consists of input channel setting, bus output channel and routing settings, effect settings, and system settings. -
Page 19: Input Channels
TQ-22 Mixer Reference manua 2.1. Input Channels 2.1.1 Home of input channels In the navigation bar, click the corresponding index System setup button, click to enter the system page or the fader page button on the panel to parameter control page. Same function as the... -
Page 20: Overview Of Input Channels
TQ-22 Mixer Reference manual 2.1.2 Overview of input channels Click the channel label or click the channel button , the system automatically enters the input channel overview page. On this page, you can view most of the parameter settings of the current channel. The physical knobs and buttons on the machine panel can be used for quick adjustment. -
Page 21: Send Operation Of The Channels
TQ-22 Mixer Reference manua 2.1.3 Send operation of the channels In the input channel editing mode, the quick knobs indicators on the panel [Send1] ~ [Send4] are lit, and the four bus buttons are in a group: [AUX1] ~ [AUX4], [AUX5] ~ [AUX8], [ FX1] ~ [FX4] lit separately, click other buttons that are not lit to switch to this group. -
Page 22: Parametric Equalization ( Peq )
2.1.4 Parametric equalization ( PEQ ) TQ-22 equipped every MIC /Line In channel with 4 bands PEQ and High / Low Pass filter, Among which BAND1 and BAND4 can select normal filter or High / Low shelf Filter Scene button, click to enter scene control page, save Home button, click to return to the channel home or load the scene parameters you need. -
Page 23: Gate
TQ-22 Mixer Reference manua 2.1.5 Gate The noise gate allows an audio signal above a set threshold to pass, attenuating or muting the audio below the threshold. In the navigation bar, click the index page or the System setup button, click to enter the system fader page button to switch to the page where the parameter control page. -
Page 24: Compressor
TQ-22 Mixer Reference manual 2.1.6 Compressor The Compressor controls the dynamic range of the signal when the signal exceeds the set threshold. 15 16 In the navigation bar, click the index page or the fader System setup button, click to enter the system page button to switch to the page where the channel is parameter control page. -
Page 25: Copy To
TQ-22 Mixer Reference manua 2.1.7 Copy to When you have carefully set an input channel, its parameters have met the requirements, and other channels have basic or identical setting requirements with this channel. In this case, the parameter copy function will be used to quickly complete the parameters of other channels settings. -
Page 26: Preset
TQ-22 Mixer Reference manual 2.1.8 Preset What is a channel preset? A channel preset is a set of saved parameter settings for a channel that can be recalled at any time. Simply save the adjusted parameters as a preset, and recall them in the future to restore the original working state. -
Page 27: Configuration
TQ-22 Mixer Reference manua 2.1.9 Configuration The channel settings configure the channel name, analog gain, phantom power, pan balance, and more. In the navigation bar, click the index page or the System setup button, click to enter the system fader page button to switch to the page where the parameter control page. - Page 28 TQ-22 Mixer Reference manual Channel name / icon / color DIY: In order to meet the needs of different usage scenarios, the channel name / channel icon / channel color can be selected or set, and the selected content will be displayed on the TFT channel guide screen synchronously, which is convenient for users to quickly identify.
-
Page 29: Output Channels
TQ-22 Mixer Reference manua 2.2. Output Channels 2.2.1 Home of output channels In the navigation bar, click the index page or the System setup button, click to enter the system fader page button to switch to the page where the parameter control page. -
Page 30: Overview Of Output Channels
TQ-22 Mixer Reference manual 2.2.2 Overview of output channels Click the channel label or click the channel button , the mixer will automatically enter the output channel overview page, where you can browse most of the parameter settings of the current channel. The physical knobs and buttons on the machine panel can be used to quickly adjust the related parameter. -
Page 31: Peq ( Same As The Input Channel, Please Refer To Section 2.1.4 )
( Same as the input channel, please refer to section 2.1.4 ) 2.2.4 GEQ TQ-22 provides a high-quality 15-band graphic equalizer for each output channel. In order to turn the page with the electric fader, the 20Hz ~ 20kHz frequency range is divided into Click on the panel. -
Page 32: Compressor ( Same As The Input Channel, Please Refer To Section 2.1.6 )
TQ-22 Mixer Reference manual 2.2.5 Compressor ( Same as the input channel, please refer to section 2.1.6 ) 2.2.6 Copy to ( Same as the input channel, please refer to section 2.1.7 ) 2.2.7 Preset Select, recall, and save channel presets. The preset is very useful and the effect is very good, completely avoiding the cumbersome parameter adjustment work. -
Page 33: Configuration
TQ-22 Mixer Reference manua 2.2.8 Configuration The channel settings configure parameters such as channel name and output delay. In the navigation bar, click the index page or the System setup button, click to enter the system fader page button to switch to the page where the parameter control page. -
Page 34: Main L/R Channel Setup
TQ-22 Mixer Reference manual 2.2.9 Main L / R channel setup The Main L/ R channel is identical to the other bus output channels. For details, please refer to the previous section. The difference is that the channel name cannot be modified, the route has no volume control, but which input channels can be selected as the source. -
Page 35: Route Assignment Operation
2.3. Route assignment operation TQ-22 has a very powerful and flexible routing function to achieve any input to any output routing control. Before the routing operation starts, please make the necessary settings for the relevant input channels and output channels according to the previous section. The routing assignment operation is as follows: (The mixer also allows the sending method to be used for volume distribution, see section 2.1.3 for details) - Page 36 TQ-22 Mixer Reference manual Route mute switch. When lit in red, the input Gain of this channel for routing assignment, unit: channel route is muted and no signal is coupled to dB. Changed by fader adjustment. the bus. Route Gain Fader (the fader slider is brown).
-
Page 37: Effect Processor
TQ-22 Mixer Reference manua 2.4. Effect processor The mixer has two completely independent effect processing modules FX1 ~ FX4, each effect module is capable of completing one of 6 effects including Chorus, Echo, Flanger, Pitch-shift, Reverb, Stereo Delay 2.4.1. TAP of effect... -
Page 38: Add Effect
TQ-22 Mixer Reference manual 2.4.3. Add effect [Step 1]: Click the bus button on the panel that needs to add effects Then select the group in the navigation bar or click the fader page button switch to the FX channel, cancel the route mute, adjust the FX routing volume, and assign the effect signal to the output bus. -
Page 39: Chorus Effect
TQ-22 Mixer Reference manua 2.4.4. Chorus effect Chorus effect, it can create the effect that several people are talking simultaneously for single speech, produce left and right reverberation, and chorus of wide and beautiful reverberation. Home button, back to the overview channels page. -
Page 40: Echo Effect
TQ-22 Mixer Reference manual 2.4.5. Echo effect Echo effect is used to create a sense of space and presence. [ Delay ]: Delay, unit: ms. Input signal and feedback signal of delay. [ Feedback ]: The amount of feedback. The output signal is fed back to the input, and the number of echoes can be changed by changing the amount of feedback. -
Page 41: Pitch-Shift Effect
TQ-22 Mixer Reference manua 2.4.7. Pitch-Shift effect Pitch-Shift is an effector which changes the tone but doesn’t change the speed. In popular terms, that is, the male voice is changed into the female voice, and the female voice is changed into the male voice. -
Page 42: Stereo Delay
TQ-22 Mixer Reference manual 2.4.9. Stereo Delay Stereo Delay ( ping-pong’s sound effect ) , which has a sound sent out from the left and right channels through the different decay of the left and right channels, like ping-pong’s motion trail effect. -
Page 43: Effect Presets
TQ-22 Mixer Reference manua 2.4.10. Effect Presets According to the current effect type, the preset parameters of the effect are invoked, which greatly simplifies the complexity of the operation, and is convenient for the user to quickly experience the flexibility and powerful performance of the professional effect module. -
Page 44: Usb Recording And Playback
TQ-22 Mixer Reference manual 2.5. USB recording and playback Click the button on the panel to quickly switch to the USB channel menu, or click the group on the navigation bar, then click the USB channel label to enter the USB control menu. -
Page 45: Usb Recording
TQ-22 Mixer Reference manua 2.5.2 USB recording You can perform stereo recording by inserting a USB stick into any USB port, and the recording source is optional. U disk playback and recording can be performed in the same USB stick. -
Page 46: Bluetooth Playback
USB control page as shown below. Click the Bluetooth switch to the open position, you can see the host Bluetooth name: TQ-22 (user can modify). Then search for available Bluetooth devices in Bluetooth devices such as mobile phones, and click on the device for Bluetooth pairing. After the connection is successful, the system displays the name of the connected device, such as "IPHONE x". -
Page 47: Grouping Shortcuts
TQ-22 Mixer Reference manua 2.6. Grouping shortcuts 2.6.1 DCA volume grouping The DCA volume group control function can realize the volume control of a plurality of pre-associated input and output channels by a single fader, and realizes the volume control of a group of devices very easily, which greatly reduces the workload of tuning, and is flexible and convenient to operate. - Page 48 TQ-22 Mixer Reference manual The DCA needs to be pre-configured with channel association before use. On the DCA overview page. Click the DCA channel label or click the button on the panel to enter the DCA settings menu, as shown below: DCA group number.
-
Page 49: Mute Groups
The TQ-22 has 8 mute groups. Click the button on the panel to switch the mute status of the corresponding mute group. The red light on indicates that the mute group is effective and the associated input / output channels will be muted. -
Page 50: User-Defined Fader
TQ-22 Mixer Reference manual 2.7. User-defined fader According to the needs of the use scenario and personal operating habits, you can define each fader of this custom page as a preset function of the mixer. The common faders are arranged on a page in the order of the user's wishes. -
Page 51: Scenes
2.8. SCENES The TQ-22 mixer includes a number of pre-set scenes for a variety of performances. For the show you are going to tune, you can find the one that works best for you. Use the scene presets to quickly configure the device to the desired working state. -
Page 52: System Settings
TQ-22 Mixer Reference manual 2.9. System settings The system setup menu is used to set or browse system parameters and machine configuration. Click the button on the panel, or on the host screen APP home interface to enter the system settings menu, as shown below. -
Page 53: Automatic Microphone Mixing Control ( Ammc )
TQ-22 Mixer Reference manua 2.9.1 Automatic microphone mixing control ( AMMC ) What is automatic mixing? When a person speaks, the system quickly assigns gain to the MIC, while other silent MICs are automatically pulled down. When the speaker stops talking, the volume of this MIC is pulled down. -
Page 54: Signal Generator
TQ-22 Mixer Reference manual 2.9.2 Signal Generator Use the built-in DSP processor to produce accurate sine, white, pink noise and optionally couple to the output channels you need, including the FX channel. Provides standard test signals for commissioning calibration and external devices for the mixer. -
Page 55: User Operation Authority Control
TQ-22 Mixer Reference manua 2.9.3 User operation authority control Authorization control is used for hierarchical management of operators. Return to the system parameter setting menu. Click Enter Password. Current user name, click to enter the user name. A list of users already exists. -
Page 56: User Interface Parameters
Mixer Reference manual 2.9.4 User interface parameters TQ-22 provides comfortable operation experience, integrated embedded LED true color lighting, soft light window filter, brightness and color can be adjusted. Return to the system parameter setting menu. Decorative light switch on the side of the mixer. -
Page 57: Firmware Upgrade
: The upgrade file must be placed in the root directory of the U disk, and the file name and extension name can not be changed !! 2). Turn on the power of TQ-22 mixer, wait till the system starts up and enters normal operating conditions. - Page 58 TQ-22. 4). Log in to the Apple App Store with your iPad, find the app with the keyword "TQ-22" and install it on your iPad. 5). Run the app. When the WIFI flag on the APP turns green, it means that the APP has established a communication connection with the TQ-22 digital mixer, and now it can be remotely operated.
-
Page 59: Power Standby And Recovery
Through the centralized control of the programmable central control unit, you can quickly and efficiently control the main parameters of the TQ-22 digital mixer, such as input/output volume and mute control, as well as scene calls, and so on. -
Page 60: Appendix 1. Technical Performance Parameters
TQ-22 Mixer Reference manual Appendix 1. Technical performance parameters ( The key performance parameters are derived from the standard test method. Test equipment: Professional audio analyzer APx525 / SN: APX2-28556 of Audio Precision Co.,Ltd.,US. All are direct results of unweighted testing. ) A). - Page 61 TQ-22 Mixer Reference manual Analog input characteristics Input level * Analog gain Used for Enter adjustment Analog gain Port Input port Maximum distortion Impedance standards range Sensitivity * before the level +52dB -68.5dBu (288.7uV) -35dBu (13.8mV) -10dB ~ +52dB 50Ω to 600Ω Mics...
-
Page 62: Appendix 2. The Mixer Block Diagram
TQ-22 Mixer Reference manual Appendix 2. The Mixer Block Diagram UG-TQ22-EN (V2.2-211226) -54-... -
Page 63: Appendix 3. Dimensions
TQ-22 Mixer Reference manual Appendix 3. Dimensions 550mm 206mm 61mm UG-TQ22-EN ( V2.2-211226) - 55 -... - Page 64 TQ-22 Showing rich sound connotations Dongguan 3G Audio Technology Co., Ltd. Add: Building 3, No.1 Nanqi street, Qiaodong road, Qiaotou town, Dongguan City, Guangdong province, 523800 China Website: www.beta3pro.com...
Need help?
Do you have a question about the TQ-22 and is the answer not in the manual?
Questions and answers