Advertisement
FUNCTIONS
11. FRONT CHANNEL HIGH-PASS FREQUENCY EXTENDER
Positioning this switch at the "x10" position changes, the range of selectable crossover
frequency for the front channel high-pass from 32 Hz - 800 Hz to 320 Hz - 8K Hz.
12. SUBWOOFER FREQUENCY SELECTOR
For selection of the low-pass crossover frequency for the subwoofer channel between 50 Hz
and 160 Hz.
13. BASS-BOOST FREQUENCY CONTROL
For setting the frequency (from 40 Hz to 120 Hz) at which the BASS-BOOSf circuitry
generates frequency boost to equalize the woofer enclosure.
14. BASS-BOOST LEVEL CONTROL
For selection of the boost level (from Oto +12 dB).
15.PHASEINVERTER
Positioning the switch to the "180" positiion shifts the subwoofer output signals 180 degrees
out-of-phase relative to the front and rear output signals.
16. SUBWOOFER STEREO/MONO SWITCH
For selection of stereo or mono mode subwoofer output.
17. FRONT CHANNEL OUTPUT GAIN CONTROL
For adjusting the front channel output signal level.
18. LEFT/RIGHT FRONT CHANNEL OUTPUT TERMINALS
To be connected to the front channel amplifier left/right inputs.
19. REAR CHANNEL OUTPUT GAIN CONTROL
For adjusting the rear channel output signal level.
20. LEFT/RIGHT REAR CHANNEL OUTPUT TERMINALS
To be connected to the rear channel amplifier left/right inputs.
21. SUBWOOFER OUTPUT GAIN CONTROL
For adjusting the subwoofer channel output signal level.
22. LEFT/RIGHT SUBWOOFER OUTPUT TERMINALS
To be connected to the subwoofer channel amplifier left/right inputs.
23. SUBWOOFER OUTPUT LEVEL REMOTE CONTROL TERMINAL
To be connected to the remote control for exclusive maneuver of the subwoofer output level,
and the subwoofer output level control on the unit ("21 " above) is by-passed.
3
Advertisement
