Advertisement
Quick Links
SP-321V
Optional Accessory Speakers for LDT321V LCD Monitor
Part Number
Frequency
Response
Power
Dimensions
(WxHxD)
Weight
Contents
Follow these steps to connect the speakers to
your LCD monitor:
1. Turn off the power switch on the LCD.
2. Screw appropriate mounting brackets into the
appropriate position on each speaker (2
brackets per speaker) using black screws.
Figure 1. (2 screws per bracket.)
3. Screw mounting brackets / speakers to the
LCD using one (1) black screw per bracket.
Figure 2.
4. Once both speakers are attached to the LCD,
connect the speaker wires to the terminals on
the LCD and then to the terminals on
attached speakers. Figure 3.
5. Turn the LCD power on.
SP-321V (designed for
LDT321V)
100Hz – 20kHz
7W + 7W @ 8 ohms with
10% THD
2.9" x 18.75" x 3.3"
73.6 x 476 x 83.82mm
2.0 lbs (net)
Speakers (2), Speaker wire
(2), Mounting brackets (4),
Speaker screws (12), Quick
Start Guide
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
Presentation Products Division
Toll Free: 888.307.03479
Email: ppdinfo@mdea.com
www.mitsubishi-presentations.com
Canada
Mitsubishi Electric Sales Canada Inc.
Information Technologies
Phone:905.475.7728
: tsupport@mdea.mea.com
www.mitsubishielectric.ca
18.75"
(476mm)
2.9"
(83.8mm)
(73.7mm)
©2007 Mitsubishi Digital Electronics America,
Inc. Standard features, options and
specifications subject to change without
notice. All trademarks are the property of their
respective holders.
3.3"
1.6"
(41mm)
1.2"
(30mm)
9.2"
(234mm)
1.2"
(30mm)
Advertisement
