Advertisement
Quick Links
Advertisement
Summary of Contents for Aixin Medical Equipment AX-SCB
- Page 1 AIXIN MEDICAL USER MANUAL AX-SCB Steam Cleaner...
- Page 2 This unit is for cleaning castings and instruments, removal of grease, sticky wax, pickling agents, contaminants and adhesives. AX-SCB Steam Cleaner is the updated version of the AX-SCA Steam Cleaner. Users can use tap water instead of distilled water which reduces production costs. The boiler, casing, buttons, indicator lights, and internal parts are made of stainless steel which significantly increases its lifespan and reliability.
- Page 3 Instructions: Plug in the power cord, the power indicator lights up. Press On/Off button, if there is no water in the boiler, the Low water indicator (red) lights up. Add water: press Spray button to release the air inside. Open the water inlet valve at the back, and add water from the water inlet.
- Page 4 Troubleshooting 1. After the machine is turned on, the low water indicator lights up, while the water tank is already full, and the machine does not start heating. This may be caused by the bad contact of the water level sensor which is caused by the rust from the water. To solve the problem, unplug and open the machine, find the two wires which connects to the power cord at the top of the boiler, remove the power cord, loosen the stainless steel stick and remove from the top, wipe the stick clean and put it back into the machine.
Need help?
Do you have a question about the AX-SCB and is the answer not in the manual?
Questions and answers