ONKRON GM25 User Manual page 5

:
ATTENTION
Choose the better range for your application For desk thicknesses ranging
from 0.39 (10 mm) to 2.1 (55 mm) refer to "
mm to 3.3 ) 5" ( 85 mm) refer to
FIG. 1:
С2
Step.1
С1
Minimum desk thickness = 1.97" (50 mm)
FIG. 2:
Maximum desk thickness = 3.35" (85 mm)
Step.1
L
С1
Step.2
С1
С2
Step 1. Securely tighten the thumb screw.
Step 2. Attach the tool holder E to the
clamp C1. No tools required.
7"
FIG. 2.
0.39"-2.17"
(10-55 mm)
Step.2
0.24"
(6 mm)
1.97" 3.35"
-
(50-85 mm)
Step.3
:
FIG. 1. For desk thicknesses ranging 1.9
Minimum desk thickness = 10 mm (0.39")
Maximum desk thickness = 55 mm (2.17")
Step 1. Attach clamp C2 to base C1
as shown in fig. 1.
Step 2. Tighten screw with hex-
L
key L.
Step 1. Remove the two 0.24"(6mm)
screws from the upper holes of clamp
C1 and reposition them to the lower
holes of clamp C1.
Tighten both 0.24"(6mm) screws using
hex-key L.
Step 2. Hang clamp-part C2 on
screws, as shown in fig. 2.
Step 3. Use hex-key L.
L
E
Step.2
Step.1
7" ( 50
5