Appendices; Appendix A: Auto Input Sensing - Mitsubishi Electric Laservue L75-A94 Basic Owner's Manual

Appendix A: Auto Input Sensing

About Auto Input S ensing
This TV's Easy Connect™ Auto Input Sensing feature
detects the following connections automatically:
• Analog video jacks
• HDMI inputs (when powered on)
• USB device containing photo and music files (JPG
and MP3 formats).
Auto Input Sensing for Most Devices
When you first connect a device, the TV will:
a. Detect the connected device and automati-
cally switch to it.
b. Prompt you to identify the device type.
c. Repeat these steps for other newly detected
devices.
When You First Connect a Device
• Most Device Types. Select the device type from
the on-screen list. The device type you select here
will appear as an icon in the Input Selection menu.
• A/V Receiver. For an HDMI-equipped A/V
receiver, select AVR from the list of device types if
the A/V receiver is not recognized automatically.
• HDMI CEC Devices Compatible with the
TV's HDMI Control Feature. Compatible
CEC-enabled HDMI devices are often recognized
automatically by the TV. HDMI Control may allow
you to control some functions of a CEC-enabled
device. See the supplemental Owner's Guide at
www.mitsubishi-tv.com.
New Device Found screen for a device with HDMI
control enabled. Select On if you want to enable the
TV's HDMI control of the device. In some cases, as
in the example, you will also be prompted to select a
device name.
Tips on Auto Sensing
• Choose a different name for each input.
• The antenna (ANT) input is never detected. It can
be turned off in the Inputs > Name menu.
• Change the device type displayed in the Input
Selection menu by using the Inputs > Name
menu.
• Some HDMI devices can automatically tell the TV
what name to use in the Input Selection menu
and you will be unable to change the name.
• The TV is unable to detect a new connection if the
current input is USB or internet. Switch to a dif-
ferent input before connecting.
Reactivating Auto Input Sensing for an HD MI Input
After you disconnect an HDMI device, Auto Input
Sensing is temporarily disabled and the disconnected
device still appears in the Input Selection menu.
Perform these steps:
1.
Power off the device.
2.
Disconnect the HDMI cable.
3.
Press MENU on the TV remote control to enter the
TV main menu.
4.
Go to Inputs > Name.
5.
Highlight the HDMI input name and press ENTER to
select Delete.
6.
Press EXIT to clear the menus.
Inputs > Name menu with Delete selected for
HDMI-3.
7.
Connect the new device and the New Device
Found screen will display.
For assistance call 1(877) 675-2224

Appendices

29