Table of Contents
Advertisement
Parameter
Serial Port for Out-of-Band
EMS Console Redirection
Settings(continued)
Description
Flow Control EMS
Š
– Flow control can prevent data loss from buffer overflow. When
sending data, if the receiving buffers are full, a 'stop' signal can
be sent to stop the data flow. Once the buffers are empty, a 'start'
signal can be sent to re-start the flow. Hardware flow control uses
two wires to send start/stop signals.
– Options available: None, Hardware RTS/CTS, Software Xon/Xoff.
Default setting is None.
BIOS Setup
- 66 -
Advertisement
Table of Contents
