Harley Benton Spaceship Power 50M Quick Start Manual

Spaceship Power 50M
Safety instructions
Intended use
This product is meant to be used as a multiple power supply for effect pedals. Any
other use or use under other operating conditions is considered to be improper and
may result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke! Never let children unattended use electri-
cal devices.
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present.
Never remove any covers. There are no user-serviceable parts inside. Do
not use the device if covers, protectors or optical components are miss-
ing or damaged.
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in
electric shock/death or fire. If in doubt, seek advice from a registered
electrician.
Features
• Lightweight, compact pedalboard with integrated power adapter
• Powder-coated aluminium frame
• Universal input voltage operation 100 - 240 V
• 7 insulated, filtered and short-circuit proof outputs eliminate noise and hum
Scope of delivery
• 3 × DC cable with a length of 30 cm
• 3 × DC cable with a length of 60 cm
• 3 × DC cable with a length of 90 cm
• 1 × reverse polarity cable with red plug
• 1 × battery clip
• 1 × connector cable with a length of 45 cm with 5.5 × 2.5 mm green coaxial plug
to 5.5 × 2.1 mm coaxial plug
• 1 × connector cable with a length of 45 cm with 3.5 mm jack plug to
5.5 × 2.1 mm coaxial plug
Operating elements
ö #
1 USB-A output, uninsulated
2 USB-C output, uninsulated
3 IEC chassis connector C14 for connecting the supplied power cord
4 Output 1 with 24 V @ 2000 mA, uninsulated
5 Output 2 with 9 V @ 3000 mA, uninsulated
6 Outputs 3 - 4 with each 9 V @ 250 mA, insulated
7 Outputs 5 - 7 with each 9 V @ 500 mA, insulated
8 Outputs 8 - 9 with voltage switches, insulated, switchable between
9 V @ 500 mA /
12 V @ 375 mA /
18 V @ 250 mA
9 Control LED for outputs 1 - 9, lights up green when voltage is present,
turns off when output is deactivated due to overload
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advices and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
Possible staining
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your surface and after some time cause perma-
nent dark stains. In case of doubt, do not put the rubber feet directly on
the surface and use a suitable underlay if necessary, i.e. felt-pad floor pro-
tectors or similar.
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or flammable cleaning agents.
• 4 uninsulated outputs for multi-effect devices or for charging smartphones or
tablets
• High current output for modern digital effects
• LED indicator on each output
• 1 × voltage boost cable, 20 cm
• 1 × current boost cable, 60 cm
• 1 × EIAJ-05 cable
• 1 × power cord with EU plug, 120 cm
• 1 × cable fastening set
• 1 × velcro tape, self-adhesive, 200 mm × 45 mm
• 1 × Allen key
• 1 × transport bag with storage pocket and shoulder strap
% & ' (
*
$
)
DocID: 520943_18.05.2022
EN