GE NERAL CO N TEN TS DESCRIPTION OF THE MACHINE ....................MACHINE OPERATIONS ............................................................................................................................................ACCESSORIES EQUIPPED WITH MACHINE ................................................................................................................................................................................................................................................................................................................................ROUTING MAINTENANCE ......................OPTIONAL ..........................TROUBLESHOOTING ........................
MACHINE OPERATION STEP: LOWER DRUM FILLING • • • • ention to the drum level FIG.1 FIG.2 IMPORTANT: to avoid motor damages during the suction check that the liquid contained in the drum does not exceed the level indicated on the drum itself (MAX) ( ) otherwise we recommend emptying the drum.
Page 7
STEP: TURNING ON • • • LIST OF THE PANELS FUNCTIONS • FIG. 7 STEP: HOSE CONNECTION • FIG. 8 • For the suction connection ( • FIG. 8A...
Page 8
STEP: ACCESSORY STARTING • • • • FIG. 9 FIG.10 • • WARNING: DO NOT USE STEAM ON ELECTRIC FIXTURES WHICH ARE ON OR ENERGIZED! FIG.12 FIG.12 FIG.11 FIG.11...
ACCESSORIES SUPPLIED WITH THE MACHINE 1. HANDLE WITH HOSE B. Suction sleeve D. Handle. MAINTENANCE OF THE HOSE 2. MULTIFUNCTION BRUSH close close ). To remove the open open 2A. FITTING FOR LIQUID SUCTION 2B. FITTING FOR CARPETS 2C. UNIVERSAL FITTING...
Page 10
3. WINDOW CLEANER windows and mirrors. NOTE: in winter the windows must be previously warmed by using the accessory at a distance of 10/15 cm. before starting cleaning. 4. 150 MM. NOZZLE 4A. WINDOW CLEANER FITTING 4B. BRISTLE FITTING 5. ADAPTER FOR THE STEAM LANCE 6.
ROUTINE MAINTENANCE MOTOR SUPPORT (D) recommend The machine can be tipped to one side only for this function (DO NOT OVERTURN THE MACHINE FOR ANY REASON!) FILTER AND SEPARATOR FILTER AND SEPARATOR instructions. SPONGE FILTER A. Filter cover FIG.13 D. Air outlet LOWER DRUM MAINTENANCE FIG.14...
TROUBLESHOOTING Sometimes problems arise from causes which can be easily removed by carrying out simple checks P RO BL EM CAUSE S O LUTI O N • Power is too low • Disconnect the hose and remove dirt minimum level with clean water minimum level with clean water not come out not come out...
WARRANTY AND TECHNICAL SERVICE TECHNICAL SHEET SAFETY • • • • Thermostat • • • • Pressure switch • • • • • • • • • • • • For any malfunction, please contact your dealer or the Technical Service. Never repair your device on your own.
Page 17
The entire range is exclusively made in Italy, in full respect of EC directives, with Italian components, to ensure durability. Genuine Made in Italy. MAXIMA srl Via E.Fermi, 16 31040 Gorgo al Monticano (TV) Tel +39 0422 749867 www.maximaitalia.com...
Need help?
Do you have a question about the FRECCIA and is the answer not in the manual?
Questions and answers