Menu Operation - Mitsubishi SD105U User Manual

Menu operation

IMAGE
INSTALLATION
FEA TURE
SIGNAL
*1: The value range of Horiz. and Vert. Positon may be varied according to different source.
*2: Not available with certain signals.
*3: Not available when the source is PC signal.
*4: Not available when the source is non interlaced signal.
Basic operation
Several settings can be adjusted using the menu.
Example : Auto power off time setting
1. Press the MENU button.
opt.
IMAGE
2. Press the or button to select INSTALLATION.
opt.
INSTALLATION
3. Press the ENTER button (or
opt.
INSTALLATION
AUTO POWER ON
AUTO POWER OFF
CONTRAST
BRIGHTNESS
WHITE ENHANCE
COLOR TEMP . (STANDARD)
COLOR
*3
TINT
*2
SHARPNESS *3
GAMMA MODE (AUTO) / DYNAMIC / STANDARD / THEATER
AUTO POWER ON
AUTO POWER OFF
(OFF) / 5min / 10min / 15min / 30min / 60min
SPLASH SCREEN
BACK COLOR
LAMP MODE (STANDARD) / LOW
IMAGE REVERSE (OFF) / MIRROR / INVERT / MIRROR INVERT
Time elapsed
LAMP HOURS
MENU POSITION (1.UPPER LEFT) / 2.LOWER RIGHT
CINEMA MODE *4 (AUTO) / OFF
ANAMORPHIC
PASSWORD FUNCTION MENU ACCESS
(ENGLISH) / 11 LANGUAGES
LANGUAGE
RESET ALL
HORIZ.POSITION *2
VERT.POSITION *2
FINE SYNC. *2
TRACKING *2
*2 RGB / YCBCR / YPBPR
COMPUTER INPUT
*2
SET UP
SVGA60
SVGA60
button).
SVGA60
OFF
OFF
±30 (0)
±30 (0)
0 ~10
LOW
CONTRAST R
HIGH
CONTRAST G
USER
CONTRAST B
0~100 (50)
0~100 (50)
0~31 (16)
ON / (OFF)
(ON) / OFF
(BLUE) / BLACK
ON / (OFF)
LOCK
UNLOCK
OK
50 (0) *1
50 (0) *1
0 ~ 31
20 (0) *1
(OFF) / 7.5%
4. Press the or
AUTO POWER ON
AUTO POWER OFF
5. Press the or
AUTO POWER ON
AUTO POWER OFF
6. Exit the menu by pressing the
the MENU button.
Important:
• When the button doesn't function, unplug the power cord from the
wall outlet. Wait about 10 minutes, plug the power cord in, and try
again.
• After selecting the items marked with
ton.
• In case of outline characters on a colored background, it means
that function is not available.
0~100 (50)
0~100 (50)
0~100 (50)
OK
OK
button to select AUTO POWER OFF.
OFF
OFF
button to adjust the auto power off time.
OFF
30 MIN
button several times,and then
, press the ENTER but-
EN-15