Table of Contents
Advertisement
Before attempting to utilize this guide, the setup procedures outlined in ASSEMBLY, PLACEMENT, POWERING ON, SETTING Z-AXIS
LIMIT SWITCH HEIGHT, LEVELING THE PRINT BED, and LOADING FILAMENT must be completed.
LEARN HOW TO SET UP AND USE YOUR 3D PRINTER
with FREE Instructional Videos Available at easwood.com – keyword search "3D Printer"
QUICK GUIDE
• To get started printing a test piece, remove the Micro SD card from the USB Adapter [HH] and insert the Micro SD card into the Micro SD card slot
located on the front-left side of the base (FIG 47).
• Power on the machine and select Print. The Micro SD card is preloaded with test print files for PLA or PETG. Select the appropriate file for the filament
type you loaded: PLA Eastwood Logo.gcode or PETG Eastwood Logo.gcode.
• The printer will automatically load all necessary settings from the G-Code and begin printing when the build plate and nozzle have warmed up
adequately. If the filament is not adhering to the bed, refer to PRINTING A G-CODE FILE for some Z-Offset adjustment instruction.
• The piece being printed is an Eastwood oval logo approximately 4" by 2" in size and will take approximately one hour to complete.
Upon completion, refer to REMOVING PARTS FROM THE BUILD PLATE for further instruction.
To order parts and supplies: 800.343.9353 >> eastwood.com
25
Advertisement
Table of Contents
