Page 2
To our valued customer, Thank you for choosing a Thank you for choosing a product by product by Manufacturing Solutions. We are pleased that we are able to provide equipment to Manufacturing Solutions. We are pleased that we are able to provide equipment to make your work easier.
USER COMPONENTS A: Safety Gate (x2) F: Gate Catch Plate (x2) B: Gate Spring (x2) G: 5/16” NC Nylock Nut (x4) C: Gate Spring Mount (x2) H: 5/16” x 2’ NC Bolt (x4) D: 1/4” NC Nylock Nut (x4) I: Safety Gate Catch (x2) E: 1/4”...
Page 4
ASSEMBLY 1. Begin by lifting the TELE-TOWER’s top guardrail up and insert the Safety Gate through it as shown. Then set the guardrail back into place. 2. Grab a Gate Spring and insert it into the square tubing at the bottom of the Safety Gate post, lining up the holes.
Page 5
9. Attach the safety Gate Catch to the inside of the Safety Gate and secure with the 5/16 NC Nylock Nuts. 10. The Safety Gate Catch can be positioned to match the Tele-Tower deck width... 19” or 22”. Make sure it is positioned to fully engage the guardrail upright post.
SAFETY INFORMATION This product contains trace amounts of the following items which are known to cause. These chemicals are not hazerdous under product’s intended use. Please review CAS# for more information. Chemical Hazard CAS# % By Weight Arsenic Trace 7440-38-2 Cancer Cadmium Trace...
If a TELPRO INC product is proven to be defective in material or workmanship within the covered time frame from the date of purchase, return the defective part to PARAGON PRO MANUFACTURING SOLUTIONS INC and we will either repair or replace the part at our option. We will neither assume nor authorize any other person to assume for us any other liability.
Page 8
uestions about assembly? Can’t find a part? Need some other help? Call us: 1.800.448.0822 701.775.0551 We’ll get you set up! W W W W e’ll get We’ll get W W W W W W W W W e’ll get We’ll get W ’ll get ’ll get ’ll get...