Table of Contents
Advertisement
Quick Links
GB
www.lehmann-locks.com
Secondary Controller
Primary Controller
Primary Controller / Secondary Controller
For connecting the RFID locks Captos and Captos iCharge
Operating Instructions
Content
Page
Safety Precautions / General Description / Supplementary documents .................................2
Technical specifications ............................................................................................................ 3
Care & Maintenance / Intended use ........................................................................................4
Function description ................................................................................................................ 5
Package content ....................................................................................................................... 6
Dimensions............................................................................................................................... 7
Description of the interfaces ....................................................................................................8
Cable routing from lock to controller (recommendation) ........................................................9
Connecting the controller ......................................................................................................10
Emergency power supply .......................................................................................................13
Disposal .................................................................................................................................. 14
Advertisement
Table of Contents
Summary of Contents for LEHMANN Primary Controller
-
Page 1: Table Of Contents
Secondary Controller Primary Controller Primary Controller / Secondary Controller For connecting the RFID locks Captos and Captos iCharge Operating Instructions Content Page Safety Precautions / General Description / Supplementary documents .........2 Technical specifications ......................3 Care & Maintenance / Intended use ..................4 Function description ........................ -
Page 2: Safety Precautions / General Description / Supplementary Documents
You have the option of configuring the locks with master and programming cards or using the LEHMANN Manage- ment Software LMS. If the LMS is used, the controllers are also used for data communication. The primary controller is the transfer point to the customer network (LAN). -
Page 3: Technical Specifications
SUPPLEMENTARY DOCUMENTS • Operating Instructions Captos MIFARE / Captos iCharge MIFARE • User manual for the LEHMANN Management Software LMS • Installation manual for the LEHMANN Management Software LMS TECHNICAL SPECIFICATIONS Primary Controller / Secondary Controller Nominal Voltage 12 VDC Power Supply external Power Supply 100-240 VAC, 50/60 Hz, 2 A, 138 W max. -
Page 4: Care & Maintenance / Intended Use
CARE & MAINTENANCE Do not spill any liquid over or into the individual components of the lock, incl. primary controller and secondary controller Only clean the components of the locking system including the primary controller and secondary controller with a clean, soft and slightly damp cloth. -
Page 5: Function Description
„online operation“. Several primary controllers can be used in a project. Up to 24 locks and a total of up to 32 secondary controllers can be connected in series to a primary controller. The controllers are connected to one another with connecting cables. -
Page 6: Package Content
PACKAGE CONTENT In addition to the primary controller or secondary controller, a power supply unit and a power cable are required to connect the power supply unit to a country-specific socket. Power supply unit, power cord, power connection cable as well as connection cable must be ordered separately. -
Page 7: Dimensions
DIMENSIONS Primary Controller Secondary Controller Power supply 1.000 1.000 Power cord 1.800 Other variants with country-specific plugs of the same length are available. Power connection cable 5.000 2.500 Connection cable 2.500 All dimensions in mm. -
Page 8: Description Of The Interfaces
Coupling / plug for connecting two data connection cables 14,48 26,96 1,75 16,75 14,48 16,75 DESCRIPTION OF THE INTERFACES Primary Controller Secondary Controller All dimensions in mm. -
Page 9: Cable Routing From Lock To Controller (Recommendation)
Connections for connecting cables coming USB type A port (only with primary controller) from locks Mini USB Input power cable Relais for future functions Output power connection cable for Opt.-In (e.g. for signal contact of a UPS unit) supplying a controller ... -
Page 10: Connecting The Controller
1 - 12 on the front, sockets 13 - 24 on the back). There is no need to adhere to a specific sequence when assigning the connections for the connection cables on the controller. Up to 24 locks can be connected to one controller. Figure: Connecting the connecting cable from the lock to the primary controller... - Page 11 Figure: Connecting the connecting cable from the lock to the secondary controller If the power supply to the controller is ensured and the connection cable is correctly plugged into the lock and cont- roller, a function test can be carried out with the installation card. A detailed description of the installation card can be found in the „Captos MIFARE / Captos iCharge MIFARE“...
- Page 12 For „online operation“, the primary controller must be connected to the customer‘s network (LAN). Only primary controllers can be connected with an Ethernet cable to the LAN and thus to the server on which the LEHMANN management software LMS is installed. Several primary controllers can be used per project. They are connected to the network separately.
-
Page 13: Emergency Power Supply
RJ12 plugs. To do this, the connection cable is plugged into the RS485 sockets on the primary controller and secondary controller. The sockets are labeled IN and OUT. Make sure that the connection cables are connected in such a way that the cables leading to the downstream controller are plug- ged into the OUT sockets. -
Page 14: Firmware Update Of The Controller / Firmware Update Of The Locks Via The Controller / Disposal
FIRMWARE UPDATE OF THE CONTROLLER If the controllers are used in „online operation“, the firmware on the controllers can be updated by using the LEHMANN Management Software LMS if necessary. This process takes place automatically after an authorized activation of the update process. - Page 15 NOTES...
- Page 16 LEHMANN Vertriebsgesellschaft mbH & Co. KG Uphauser Weg 82 • D-32429 Minden Fon +49 571 / 50 599-0 • Fax +49 571 / 50 599-822 info@lehmann-locks.com • www.lehmann-locks.com DIN EN ISO 9001:2015 zertifiziert...
Need help?
Do you have a question about the Primary Controller and is the answer not in the manual?
Questions and answers