Advertisement
[Example 2]
When setting the CONTRAST R of the COLOR TEMP.-USER to +10, the CONTRAST G to 0, and
the CONTRAST B to -5. (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
30 30 50 2B 31 30 2B 30 30 2D 30 35 0D
'0' '0' 'P' '+' '1' '0' '+' '0' '0' '-' '0' '5' '
[Example 3]
When checking the TINT setting (when the TINT is set to +10). (Figures and symbols enclosed in
quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
30 30 53 0D
'0' '0' 'S' '
'
[Example 4]
When setting the GAMMA MODE of the COLOR ENHANCER-USER to DETAIL. (Figures and
symbols enclosed in quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
30 30 43 45 55 31 47 53 32 0D
'0' '0' 'C' 'E' 'U' '1' 'G' 'S' '2' '
'
30 30 50 2B 31 30 2B 30 30 2D 30 35 0D
'0' '0' 'P' '+' '1' '0' '+' '0' '0' '-' '0' '5' '
30 30 53 2B 31 30 0D
'0' '0' 'S' '+' '1' '0' '
'
30 30 43 45 55 31 47 53 32 0D
'0' '0' 'C' 'E' 'U' '1' 'G' 'S' '2' '
Status code from
the projector
'
Status code from
the projector
'
Status code from
the projector
'
6
Description
Command for setting the
picture control
Command receipt confirmation
(Command echo back)
Description
Command for checking
the TINT setting
Check result (+10)
Description
Command for setting the
picture control
Command receipt confirmation
(Command echo back)
Advertisement
