Using The Menus - Mitsubishi EW230U-ST User Manual

Using the menus

The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings.
Below is the overview of the OSD menu.
Main menu icon
Highlight
Current input signal
Below is an example about how to set the OSD language.
1. Press MENU/EXIT on the projector or remote
control to turn the OSD menu on.
2. Use / to highlight the SYSTEM SETUP:
Basic menu.
Main menu
Sub-menu
3. Press to highlight Language and press
to select a preferred language.
4. Press MENU/EXIT twice* on the projector or
remote control to leave and save the settings.
*The first press leads you back to the main menu and
the second press closes the OSD menu.
Status
Press MENU/
EXIT to go
back to the
previous page
or to exit.
/
EN-21