Download Print this page
Coby CX-CD616 User Manual
Coby CX-CD616 User Manual

Coby CX-CD616 User Manual

Coby electronics super slim personal cd player with 15 second anti-skip protection user guide cx-cd616

Advertisement

Quick Links

SUPER SLIM PERSONAL CD PLAYER
with 15 SECOND ANTI-SKIP PROTECTION
CX-CD616
Consult your dealer if you are ever in doubt about the installation,
operation or safety of your equipment
The CD mechanism and the sensitive circuitry may cause interference
to a radio tuner nearby. Do not operate this unit while operating other
radio devices.
Danger
This product utilizes invisible laser
radiation. Avoid direct exposure to
the beam.
Caution
Use of controls, adjustments or procedures not listed in
this manual may result in hazardous radiation exposure.
General
Only compact discs identified with this mark can
be used with this player.
Maximum Output (Stereo Headphone..15mW+15mW(32ohm)
AC Adapter......................................110V 60Hz
DC....................................................4.5V with DC Adapter
3V with 2 size "AA" Batteries
(1)Press PLAY/PAUSE (
)button to turn
the power on.
(2)LCD screen will display " 15 SEC " .
(3)LCD screen will display " diSC " if CD is not
in the unit.
1
ALL
INTRO
RANDOM
PROG
HOLD
ANTI-SHOCK
LCD Display
Anti-shock button
PROG button
DBBS button
MODE button
Stop button
Play/Pause button
REW
button
FF
button
To replace the insert color, gently press the three points under CD door.
(4)LCD screen will display "Er" if the unit cannot
read CD track data.
ANTI-SHOCK
(5)When CD track data has been read, LCD
(1) Press FF
(or REW
screen will display the last track number
desired track# . Press PLAY/PAUSE
with the total play time.
button to play. Press FF
ANTI-SHOCK
button to change the track # during the
play mode.
(6)Unit will start play from track No.1
automatically.
ANTI-SHOCK
C OM PA C T
(2) During play, press REW
Press STOP(
)button to stop play,
DIGITAL AUDIO
previous track.
and the last track Number will display.
ANTI-SHOCK
Press PLAY/PAUSE(
)button to pause
on/off alternately.
ANTI-SHOCK
Time display will flash on pause mode.
(3) During pause mode, press FF
button to play the next track (or previous track).
The unit will keep in pause mode and time
display will flash.
ANTI-SHOCK
ANTI-SHOCK
2.Plug in AC adapter and slide the "CHARGE SWITCH" to "ON"
position to start charging.
BATTERY OPERATION (BATTERIES NOT INCLUDED)
AC Adapter Not Included
Your unit operates on two (2) AA size alkaline batteries. Open the
CD cover and insert the batteries in the battery compartment
following the polarity diagram located inside.
RE-CHARGEABLE BATTERY OPERATION
(BATTERIES NOT INCLUDED)
You can operate this unit with two "AA" rechargeable batteries.
For new or exhausted rechargeable batteries, we recommend
3. Unplug the AC adapter after charging.
that batteries are recharged for 15 hours before use.(Refer to
DO NOT CHARGE THE BATTERIES MORE THAN 24
battery manufacturer's guide)
HOURS OR MORE THAN RECOMMANED TIME.
OVER CHARGINGMAY DETERIORATE THE
When operating the unit with AC adapter and non-rechargeable
PERFORMANCE OF THE RECHARGEABLE BATTERIES.
batteries in the compartment, please make sure to set the
"charge" switch to "off" position to avoid damaging the unit.
4.If the operating time decreases drastically after the batteries
have been recharged properly, purchase new rechargeable
DC jack
NiCd batteries.
1.Open the CD cover and insert the batteries (2 X "AA" )in the
Headphone jack
Do not attempt to recharge alkaline batteries . This may cause
battery compartment following the polarity diagram located
leakage and damage to the unit.
Volume control
inside
Do not mix alkaline batteries with rechargeable batteries.
BOTH BATTERIES MUST BE RECHARGEABLE NiCd TYPES OR THE
Do not leave the batteries on recharge for long periods of time.
BATTERIES MAY EXPLODE OR LEAK.
This can damage the performance of the cells.
Hold switch
Due to the nature of CD technology, the unit uses power even
when the unit is off. To extend the batteries' life, use the adapter
Open door lock
for indoor opera-tion or where power is supplied. Use the battery
operation only when the unit is in mobile.
(1) Press MODE button three times during
During play, press and hold FF
(or
REW
) button to fast forward (or
(2) Press PLAY/PAUSE (
fast reverse) the current track.
ANTI-SHOCK
)button to set the
ANTI-SHOCK
(or REW
)
Press FF button
1
(3) Press FF
(1) Press MODE button once to repeat
one track.
ANTI-SHOCK
(4) Press REW
ANTI-SHOCK
ALL
(2) Press MODE button twice to repeat
button to play
all tracks.
ANTI-SHOCK
ANTI-SHOCK
(1) Press MODE button four times at STOP
Press REW button at the head of NO.4
(2) Press PLAY/PAUSE (
To listen to the first 10 seconds of each track.
INTRO
(1) Press MODE button three times at STOP
ANTI-SHOCK
mode and "INTRO" will display.
ANTI-SHOCK
Or
(or REW
)
(1) Select RANDOM mode during play and
(2) Press PLAY/PAUSE (
) button to starts
INTRO
INTRO from track No.01.
ANTI-SHOCK
(2) Press PLAY/PAUSE
ANTI-SHOCK
Or
(3) To cancel RANDOM mode, press MODE
DBBS FUNCTION
The Dynamic Bass Boost System(DBBS) enhances the low
frequency(Bass) response of the output. Set the Volume to
low listening level and press DBBS switch in the direction of
the arrow to turn this function ON.
Note:
Some CD's with DBBS may exceed the bass response
capacity and can cause distortion. To avoid this,
do not play DBBS in high volume. Playing DBBS in
high volume may cause damage to the headphone
andmore importantly, to your hearing.
HOLD FUNCTION
This HOLD function prevents any unwanted function changes
during PLAY or STOP mode. Slide HOLD switch to the arrow
direction (or opposite) to turn the function ON (OFF). No other
function buttons operate on HOLD mode, except DBBS function
button.
CAUTION
Hearing experts advise against the constant use of personal
stereos played at high volume. Constant high volume use
can lead to hearing loss. If youexperience ringing in the
ears or hearing loss, discontinue use and seekmedical
advice.
.
To remove the disc from its storage case, press down on the
center of the case and lift the disc out. Hold it carefully by the
edges as shown below.
INTRO
play and "INTRO" will flash.
ANTI-SHOCK
(1) TO PROGRAM
)button to start
(a)Press PROG. button and
INTRO
INTRO play from track No.1.
"PROG" and "
" will flash.
ANTI-SHOCK
INTRO
button to start INTRO play
(b) Press FF
(or REW
) button to select
from
next track.
ANTI-SHOCK
the track number.
button to start INTRO play
INTRO
from current or previous track.
(c) When desired track is displayed, press
ANTI-SHOCK
PROG. button to set.
RANDOM
(d) Repeat (b)~(c)to set up 20 tracks.
mode and "RANDOM" is displayed.
The display will show the current set track.
ANTI-SHOCK
) button to play
RANDOM
(e) Set tracks can be checked by pressing
tracks in random order.
ANTI-SHOCK
PROG. button.
RANDOM
"RANDOM" will start flash.
(2) TO COMPLETE THE PROGRAMMING AND TO PLAY
ANTI-SHOCK
Press PLAY/PAUSE (
)button to start the
FF
or REW
programmed tracks.
button to play tracks in random order.
RANDOM
ANTI-SHOCK
or STOP ( )button.
Insert the disc into the unit with the label of the disc facing UP .
Gently wipe the disc using a soft cloth from the center to the
outer direction to remove dust, fingerprints or any other
particles on thedisc surface. Never use chemicals, such as
record sprays , anti-staticsprays, benzene or thinners to
clean the CD. These chemicals candamage the disc surface
permanently.
To avoid serious scratches on CD, keep them in the cases
after each use. Scratches can cause the laser pick-up skip
in the future play.
Do not place stickers or write anything on the disc.
Read the instruction manual before operating this unit.
Do not expose the unit to high temperature or humidity.
Use dampened soft cloth to clean the unit. Do not use
strong detergent or solvent to clean the unit.
Ensure that all electrical connections (including the main plug,
extension leads and interconnections between pieces of
equipment)are properly made and in accordance with the
manufacture's instructions.
(3) TO CLEAR THE PROGRAMMING
Press STOP(
)button.
PROG
ANTI-SHOCK
Press ANTI SHOCK button to prevent disruption
or stopping of CD player. LCD will display "
"
PROG
at anti-shock mode.
ANTI-SHOCK
ANTI-SHOCK
ANTI-SHOCK
(1)
is displayed when the battery voltage
reaches low.
ANTI-SHOCK
(2) When the voltage is too low, the unit will
automatically turn off.
PROG
ANTI-SHOCK

Advertisement

loading

This manual is also suitable for:

Cd616