Jack 18393 Manual

Thank you for choosing Whites' Ultrasonic Animal Repeller (UAR).
This repeller is designed to help you rid your premises of
uninvited animal visitors such as dogs, cats and rodents
safely and humanely.
Using sophisticated Passive Infrared (PIR) detection, the repeller
detects movement and triggers short bursts of powerful
ultrasonic sound waves.
Assembly Instructions
To assemble and install
1. Open battery cover and insert 3 x AA batteries (Fig. 1)
2. Stake or mount into position
a. If staking, assemble 2pc stake and insert into base (Fig. 2a)
b. If hanging, fix bracket using appropriate screws
and mount repeller (Fig. 2b)
3. Turn sensitivity dial to adjust coverage up to 8m / 45sqm
Notes
• The repeller is designed to be left ON continuously
• Do not immerse repeller into water
• Do not cover the PIR sensor
TM
Ultrasonic
Repeller
FOR
OUTDOOR
USE
Motion activated animal deterrent
3 x AA
alkaline battery
Figure 1
Warning
!
Always check underground utilities, cables
or wires before digging or installing!
Failure to check could result in personal injury,
property damage or even death.
Repeller unit will be exposed to the
elements so ensure unit does not
immerse in water.
ANIMAL
Figure 2a
Figure 2b Figure 3
– +