Advertisement
Advertisement
Table of Contents
Summary of Contents for MECA EVO1 SQ
- Page 1 EVO1 SQ www.mecasimhardware.com...
- Page 2 Dear customer, thank you for purchasing our MECA EVO1 SQ. This EVO1 SQ sequential shifter was developed as part of our MECA EVO1 series to accompany our newest pedal set. Before you install or use the product, please read the manual which will provide the basic information required for the first installation and the possible configurations of our handbrake.
- Page 3 1x Special wrench for adjusting the spring preload 1x Electronic box 1x M6x25 1x Steel washer 1x Plastic washer 1x Steel washer 1x M6 nut MECA EVO1 SQ Setup Guide | Contents of packaging MECA EVO 1 SQ Setup Guide | Shifter assembly...
- Page 4 If you wish to change your shifter handle, you can do so. The handle is mounted on 30mm long M10 thread. Included in package Use 19mm wrench Use flat screwdriver Don't tighten the sprung ball screw fully, it will block the mechanism MECA EVO 1 SQ Setup Guide | Shifter assembly MECA EVO 1 SQ Setup Guide | Shifter assembly...
- Page 5 CONTACT Email: support@mecasimhardware.com Website: www.mecasimhardware.com www.mecasimhardware.com...
Need help?
Do you have a question about the EVO1 SQ and is the answer not in the manual?
Questions and answers