Table of Contents
Advertisement
• When using the car polisher never keep the car running
inside an enclosed place.
• Make some test with the polisher before starting the job.
If the tool makes strange noises or vibrates in an irregular
way turn it off. Disconnect the tool and take it to a
Authorized Service Center.
• The tool shall be OFF and disconnected when not in use.
• Prevent the tool to unexpectedly start. Keep fingers away
from the On/Off switch when connecting the polisher to
the power outlet.
• To avoid electric shock keep the tool dry and clean, free
for any residual oil and grease.
To set the buffer into the holder put the
polisher upwards. Untie the buffer string and
wrap the holder with the buffer. Turn around
the polisher back. Tighten and make a knot
with the string to fix the buffer in place.
6
ENGLISH
Parts
Power
cord
Power Cord
Protector
Handle
Switch
Safety warnings for
car polishers
• Always start and stop the polisher while the buffer is
making contact with the surface. Otherwise the buffer may
get out of the holder.
• Do not force the tool. Hold firmly but do not exercise
downwards pressure. Otherwise, the tool movement will
be slow, the job quality will diminish and the tool will be
severely damaged. Bear in mind the tool is not for
industrial use. It is built for household use.
• Do not use abrasive mixtures.
• Take care of the tool. The job is easier with a tool in good
shape.
Ventilation
slots
Handle
Buffer
holder
Bonnet
(5 included)
Advertisement
Table of Contents
