Summary of Contents for SUPXTARK PX168
- Page 1 PX168/PX168D Instruction Manual Quick Start Guide For Gauge Hole Receivers Not all features listed in this QSG are available on all models. THIS PACKAGE CONTAINS Trim Bezel Mounting screws User Manual...
-
Page 2: Mounting And Wiring
Mounting &Wiring Please read entire manual before installation. Before You Start Disconnect negative battery terminal. Consult a qualified technician for instruction. Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. 0.95"... -
Page 4: Control Locations - Receiver
Control Locations - Receiver Power Band Tune Down/Previous Track Preset Play/Pause Source Tune Up/Next Track Volume knob (Rotate) / SEL/Confirm (Press) -
Page 5: General Operation
General Operation Power on/off -- Press the ' ' button to turn the unit on. Short press ' again to turn the unit off. Brightness -- Press ' ' to adjust the back light brightness ( High / Medium / Off). Changing Modes -- Press SRC to select between AM/FM, USB, Auxiliary and Bluetooth Music. -
Page 6: Am/Fm Tuner Operation
AM/FM Tuner Operation 1. Press the SRC button to select TUNER 2. Press >II button to MUTE, press again to UNMUTE 3. To manual adjust frequency press >>I or |<< 4. Press the PRESET button to recall PRESETS 1-6 5. Press BAND to switch between FM1, FM2, FM3, MW1, MW2, WB; Tuner Function Setting Press and hold Navigate between AUTO... -
Page 7: Bluetooth Operation
Activate the Bluetooth on your smartphone to search for new devices. Connect with the device name ' PX168 ' when found. (If pin number is required by smart phone, please enter '0000'). Once pairing is successful, 'Bluetooth' icon will be displayed on the screen. -
Page 8: Tuning Dab+ Stations
DAB Operation (available forPX168D only) Note: DAB+ ( Digital Audio Broadcasting) is only available for some European countries and Australia where has the Digital Radio Broadcasting. Press SRC button to switch to DAB+ mode,PX168D will automatically scan for local digital stations. This process may take a few seconds depending on the numbers of available stations. -
Page 9: Troubleshooting
Trouble Shooting ISSUE OPTIONS Cause: Yellow/red wire not connected or incorrect voltage Action: Check connections for proper voltage (11-16V DC) Cause: Black wire not connected Unit will not turn on (no power) Action: Check connection to ground Cause: Fuse blown Action: Replace the fuse Cause: Speaker wire not connected Action: Check connections at speakers... -
Page 10: Fcc Warning
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the PX168 and is the answer not in the manual?
Questions and answers