SooPii WR07 Instruction Manual

Car Wireless Charging Mount
�
Im
Product Ove『view
-rl I t:;, ---o-
／ 飞
m l 亏
!
咐
, _
＿）－
广才�� ；.？叫.D
l.Smart叫ess叫ng zone①
＼／ 自二三 飞
2. Smart wireless cha ging zone®
°lfl
..!,.
「 ""
3. Clamp arm
4. Clamp switch (both sides)
5. Indicator light (both sides)
6. Adjustable bottom holder
7. Type-C charging port
8. Vent clip
9. Vent clip

Product Overview

All phones that support wireless Qi chargi门g,please check whether your phone
supports Qi wireless char日ing

How to Remove or Put the Phone on The Clip Arm

Put On Your Phone:
Press the clamp switch (there are buttons on both sides) and the clamp arm will
open. Put your pho门e on and the clamp a m will automatically close
「
Two Way to Remove You『Phone:
Way 1 (When car is on): Press the clamp switch,the left and right clamp a
open automatically to remove your phone;
Way 2 (When car is on or off): Unplug the pho门e directly from the stand.the clamp
arm will remai门 closed

LED Indicator Status

LED Indicator Status
White Power is connected
日reathi门g white Pho门e is charging or fully charged
Flashes white fa, 5s then turns off I Metal obJect detected
Flashes wnite f，。， 5s, then turns off I The peo,e does not supp。叫I wireless chargicg
Flashes white for 5s, then tums off I Omheati呵
－－－
，
。
一言
Light ff
I lccorr阳山le adapter or四ble is connected
J
、.！.，
''

Important Notes When Using Wireless Charging:

电�
• In order to ensure the charging efficiency and stability Adjust the bottom bracket of the
bracket to the lowest gea before placing the Samsung Galaxy Z Flip, so that the coil of
『
the mobile phone can be perfectly aligned with the cha『ging coil of the bracket;
Other mobile phones with wireless char日ing function can als
。
Make the center f the back of the phone align with the coil on the bracket panel as much
｜ 丁 as pnssible. Different sizes of phones ccrrespond to different gears.
I
• Do not connect the product to a 5V/l A car charger o『USB port, otherwise it may affect
'IJ It
the wireless charging function.
For fast charging experience it is recomme门ded to use QC3.0 or PD car charger
ι
• Do not use the product in a car higher than 60", it may cause the wireless charging slow
or suspended.
• Do not use this product in professional racing or e盯reme off road driving
。
• Ultra thick phone cases or ph ne cases with magnetic/iron plates are not recommended
as this may affect wireless charging functionality.
·口o not place any fore咱n objects, including ca「metal pads, credit cards, doer keys, corns,
metal, NFC cards, between the smartphone and the su『face of the wireless charger,
otherwise it may cause overheating
Important Safety lnstructi口ns:
• Avoid falling
• Do 门ot disassemble
• Do not touch liquids
• For the safest and fastest charging, use an original or certified cable
• This product is only suitable for mild climates.
ms will
「 • The ambie门t temperature should not exceed 60"during the use of this product
• Candles a门d other open flame sources should not be placed O门 this product
• Only use a dry cloth or brush to clean this product

Product Parameters

5V=2A gV=2A 12V= l .5A
川
I I
一
l 5W Max
叫
一
问 110 x 66×18mm
I
Weight l 42g 5.00Z
I
sho川口阳问roblems detected
For more information and supp。此，please visit:
。
be cha ged with this stand
「
4.3×2.6 x 0.7 in
......＿.， ..
＇.］让且且f 川－' i ••I•"•""''-