Mondella Concerto FHS101 Installation Manual

CONCERTO HEATED BIDET SUITE
Plumber's Installation Guide

PACKAGE CONTENTS

Please ensure that all items below have been included in this Concerto Heated Bidet Suite and that all parts are
undamaged prior to installation. If any items are damaged or missing, please contact Customer Support immediately.
CARTON 1
Rimless Pan
Floor Fixing
Brackets
This toilet suite must be installed by a
licensed plumber in accordance with local,
State and National Standards and
Regulations.

Before Installation

The Concerto Heated Bidet Suite requires the
following setout for bottom entry installation as well as external
connection requirements for water and power supply for the
Heated Bidet Seat.
Setout 90-180mm setout for S trap and 180mm for P trap.
This toilet is supplied with a vario bend S trap. Please note, a
suitable P trap connection can be installed when required. Floor
and wall must be perpendicular and the toilet must be installed
on a level surface.
Smart Seat Plumbing The Concerto Heated Bidet Seat
requires water supply on the left of the toilet so that a T valve
and hose may be installed as part of the smart seat installation
(see figure on right).
Smart Seat Power Supply The Concerto Heated Bidet
Seat requires a power outlet to the right of the toilet that must be
installed as per local, State and National regulations.
CARTON 2
Vario Bend
Cistern
S Trap
Instruction
Cistern
Manual
Outlet Seal
Product measurements are subject to
some variance due to manufacturing process.
Always check physical product dimensions
prior to setout and installation.
Flush Valve
Fill Valve
Pan/Cistern
Bolts
Hose from
water
supply to
smart
seat
Please note:
Dual Flush
Button
Heated Bidet Seat
(& Parts)
700
700 700
85
Ø32
235
Ø10
280
610
375
360
360
305
Inlet Plug
Smart Seat
Instruction Manual
Dimensions in mm
Power cord
to power supply
1