Advertisement
Quick Links
Paradox V2
User Manual
Technical Information
● Width 8hp
● Depth 28mm
● Current draw 35mA @ +12V
● Current draw 35mA @ -12V
Inputs
1V Linked
+/-10V range. Standard 1V per octave exponential response. Changes the pitch of both
oscillators simultaneously.
1V
+/-10V range. Standard 1V per octave exponential response. Changes the pitch of a single
oscillator.
exFM (external frequency modulation)
+/-10V range. AC coupled linear response. Modulates the pitch of the top oscillator.
SYNC
+/-10V range. External input to perform a syncing function of the top oscillator. Gate signals can
be used to stall the core and effectively turn off the top VCO.
Advertisement
Summary of Contents for Noise Reap Paradox V2
- Page 1 Paradox V2 User Manual Technical Information ● Width 8hp ● Depth 28mm ● Current draw 35mA @ +12V ● Current draw 35mA @ -12V Inputs 1V Linked +/-10V range. Standard 1V per octave exponential response. Changes the pitch of both oscillators simultaneously.
- Page 2 PWM (pulse width modulation) +/-3V range. Changes the duty cycle of the pulse wave output. Signals outside approx +/-3V will cause the pulse to become so narrow that it disappears and flatlines. Effectively turning off the bottom VCO. Outputs TRIANGLE 10.8Vpeak-to-peak.
- Page 3 FM AMT Attenuator for the amount of linear frequency modulation routed from top to bottom. This will create new and complex tones out of the bottom oscillator. SYNC ON/ON switch. When switched to the right, it syncs the tuning of the top oscillator to the bottom. The bottom oscillator sends a hidden triangle wave signal to do the modulating.
- Page 4 Standalone Noisebox C Patch the PULSE output into the top 1V input. Patch the TRIANGLE output into the bottom 1V input. Control the whole mess with 1V LINKED. Noisebox C gets even crazier than noisebox B.