NSC Sicherheitstechnik Evalarm EV-NT (M) Setup Manual

Gsm emergency call

Advertisement

11/2019
Setup guide GSM emergency call Evalarm "EV-NT (M)"

Step 1: check SIM card

Please check whether the SIM card is unlocked. Simply start in a cell phone and, if necessary, the
Turn off the pin code. The SIM cards must have the mini-SIM format!

Step 2: connect the SIM card

Open the device on the back, open the SIM card slot, insert the SIM card and close the slot again.

Step 3: start up the device

Connect the 12V power supply and set the switch to "on".

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Evalarm EV-NT (M) and is the answer not in the manual?

Questions and answers

Summary of Contents for NSC Sicherheitstechnik Evalarm EV-NT (M)

  • Page 1 11/2019 Setup guide GSM emergency call Evalarm "EV-NT (M)" Step 1: check SIM card Please check whether the SIM card is unlocked. Simply start in a cell phone and, if necessary, the Turn off the pin code. The SIM cards must have the mini-SIM format! Step 2: connect the SIM card Open the device on the back, open the SIM card slot, insert the SIM card and close the slot again.
  • Page 2 Step 4: Set EVALARM target number The EV-NT (M) is controlled via SMS to the SIM card. The first part of the message does this preset password (1234), the position in the alarm list (01) and the list itself (A). You can control the target number for the detector using the following message: 123401ADESTINATIONNUMBER# EVALARM target number:...

Table of Contents