VP TMK 300 User Manual

VP TMK 300 User Manual

Tree shears

Advertisement

All site activity must be thoroughly planned before work commences to
These instructions form guidance for Tree Shears. Non-standard
applications should be approved by a suitably qualified engineer.
Ensure all personnel engaged in installation operations are properly briefed
and adequately supervised by a competent person.
Rev
Date
Comments
1.3
29/06/22
Branding update
Tree Shears
Important Notes
identify hazards and assess risk.
THIS USER GUIDE IS NOT CONTROLLED WHEN PRINTED
Videos showing the
TMK 300
watch now on YouTube.
IF IN ANY DOUBT SEEK FURTHER ADVICE:
ON FREEPHONE - 0800 111 4665
Initial
DSW
PW 350
and the
Tree Shears are available to
User Guide
Tree shears_user guide_1.3_EN_29-06-22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TMK 300 and is the answer not in the manual?

Questions and answers

Summary of Contents for VP TMK 300

  • Page 1 THIS USER GUIDE IS NOT CONTROLLED WHEN PRINTED Videos showing the PW 350 and the TMK 300 Tree Shears are available to watch now on YouTube. IF IN ANY DOUBT SEEK FURTHER ADVICE: ON FREEPHONE - 0800 111 4665...
  • Page 2: Personal Protective Equipment (Ppe)

    User Guide SAFETY Common Symbols and Meanings Safety Note: We recommend using hand and eye protection when operating hydraulic equipment PERSONAL PROTECTIVE EQUIPMENT (PPE) Use eye protection Use hearing protection Wear protective gloves Wear head protection Wear protective footwear WARNING SYMBOLS General warning Crushing of hands Hot surface or oil...
  • Page 3: Equipment Identification

    Tools to cut and handle trees and brush for timber harvesting using powerful shear cuts and heavy duty twin clamps for safe and accurate handling. Tree Shears bunch, grip, cut and extract branches and trees vertically without damaging the surrounding forestry, rail and land management. Equipment Identification TMK 300 (Fig.1) PW 350 (Fig. 2) Equipment Specification Model...
  • Page 4: Preliminary Checks

    User Guide Preliminary Checks Tree Shears can be attached to any excavator that meets the necessary mechanical and hydraulic installation requirements. Check the following points before installation:  Tree Shears should only be mounted on an excavator with sufficient load capacity. ...
  • Page 5: Pre-Use Checks

    User Guide Pre-use Checks When all installation works are completed, check the following before operating Tree Shears. While moving the excavator’s bucket cylinder slowly in and out in the direction of ‘crowd’ and ‘dump', check:  For any interference or obstruction between the Tree Shear and excavator; ...

This manual is also suitable for:

Pw 350

Table of Contents