Setting A Programme; Adjusting The Programme Settings; Loading Laundry; Using A Measuring Aid For Liquid Detergent - Bosch WAX32MH0BY User Manual And Installation Instructions

Table of Contents

Advertisement

Note: The drum is lit up after the
door is opened and closed and once
the programme has started. The light
goes out automatically.
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 25
If necessary, adjust the pro-
2.
gramme settings → Page 37.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 37
Adjust the programme settings.
→ "Programmes", Page 25
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 25.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 33
Open the door.
1.
Make sure that the drum is empty.
Load the laundry unfolded into the
2.
drum.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Using a measuring aid
for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
Basic operation en
37

Advertisement

Table of Contents
loading

Table of Contents