Table of Contents
Advertisement
B
Enter G-
number
CODE
Press the number keys to enter the
G-
number of a programme you
CODE
wish to record.
● If you make a mistake, press & and
input the correct number.
C
Enter G-
programme screen
CODE
Press OK, and the G-
CODE
screen appears. (If you're just starting
out, "P1" appears.)
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see "G-
CODE
page 10 and set the Guide Program number for that G-
number correctly.
● If the number you entered is invalid, "ERROR" appears on the
screen. Press & and input a valid G-
● If the "G-CODE/SHOWVIEW SETUP" screen appears, see
"ATTENTION – Regarding Guide Program Number Set"
on page 11.
D
Set tape speed
Press p to set the tape speed.
E
Access title edit screen
Press the number keys "1". The Title Edit
screen appears.
● You can access the Title Edit screen
only when "PROG. NAVIGATION" is
set to "ON". (
16)
F
Enter programme title
Press the number keys and PUSH JOG e
to enter characters, then press OK For
details, refer to "Entering Character" on
page 14.
G
Return to normal screen
Press PROG or OK. "PROGRAM
COMPLETED" appears on the screen for about 5 seconds, then
normal screen appears. If "PROGRAM OVERLAPPED" appears on
the screen and "Err" on the display panel, see page 12.
● Repeat steps 1 – 7 for each additional programme.
H
Engage recorder's timer mode
Press #. The recorder turns off automatically and "#" appears on
the display panel.
● To disengage the timer, press # again.
Satellite Tuner Users
To timer-record a satellite broadcast using the G-
A Perform steps 1 – 8.
B Set the satellite tuner to the appropriate channel before the
selected programme begins.
C Leave the satellite tuner's power on.
G-CODE/SHOWVIEW NO.
1 2 3 4 5 6 7 8
[0-9]
[&] : DELETE
[PROG] : EXIT
– PI –
Programme
NO. 123456789
START
21:00
DATE
25.04
: OK
TM
TM
/S
V
System Setup" on
HOW
IEW
number.
CODE
– P1 –
25.04
[0-9] : SELECT LETTERS
[&] : DELETE
[Y/U] : CURSOR
: OK
[PROG] : EXIT
– P1 –
25.04
[0-9] : SELECT LETTERS
[&] : DELETE
[Y/U] : CURSOR
: OK
[PROG] : EXIT
CODE
ATTENTION
Regarding Guide Program Number Set
"G-CODE/SHOWVIEW SETUP" appears after performing step 3
if the Guide Program number for the G-
entered has not been set.
● Press the number keys or PUSH
JOG rt to input the channel
position number on which your
STOP
recorder receives that station, then
22:00
press OK or PUSH JOG e.
SP
The G-
TV PROG
appears.
1
[1] : TITLE
(Ex.) To timer-record a RTR
programme with the G-
* If your recorder receives RTR on the channel position 2, press OK or
PUSH JOG e after entering "2".
CODE
Express Timer Programming
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder will
come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Select the appropriate colour system (
A
Access G-
Press PROG.
B
Access programme screen
21:00 PR.1
Press START +/–. (If you're just starting
out, "P1" appears.)
C
Enter programme start time
W
Press START +/– to enter the time you
want recording to start.
● Press and hold START +/– to move in
30-minute increments, or press and
release repeatedly to move 1 minute at
a time.
D
Enter programme stop time
Press STOP+/– to enter the time you want recording to stop.
● Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter programme date
Press DATE+/–. (The current date appears on screen. The date you
enter appears in its place.)
F
Enter channel position
Press PR +/–.
system:
G
Set tape speed
Press p to set the tape speed.
H
Access title edit screen
Press the number keys "1". The Title Edit
screen appears.
● You can access the Title Edit screen
only when "PROG. NAVIGATION" is
set to "ON". (
I
Enter programme title
Press the number keys and PUSH JOG e
to enter characters, then press OK. For
details, refer to "Entering character" on
page 14.
— 11 —
program screen
CODE
system.
CODE
screen
CODE
16)
number you
CODE
G-CODE/SHOWVIEW SETUP
GUIDE PROG
TV PROG
2
– –
[0-9] OR [R/T]: SELECT
[MENU] : EXIT
15).
[1] : TITLE
21:00
[1] : TITLE
21:00
22:00
25.12
1
[1] : TITLE
– P1 –
25.12
21:00 PR.1
[0-9] : SELECT LETTERS
[&] : DELETE
[Y/U] : CURSOR
: OK
[PROG] : EXIT
– P1 –
25.12
W
[0-9] : SELECT LETTERS
[&] : DELETE
[Y/U] : CURSOR
: OK
[PROG] : EXIT
Advertisement
Table of Contents
