Table of Contents
Advertisement
tams elektronik
1. Getting started
The instructions will help you step by step with the safe and proper installation and use of
your s88 repeater. Before you put the repeater into operation, read this manual completely,
especially the safety instructions and the section on possible errors and their elimination. You
will then know what you have to pay attention to and thus avoid errors that sometimes can
only be rectified with a lot of effort.
Keep the instructions in a safe place so that you can restore functionality later in the event of
any malfunctions. If you pass the s88 repeater on to another person, also give the instructions
with it.
1.1. Contents of the package
1 s88 repeater
Patch cables for connection to the s88 bus are not included in the scope of delivery.
1.2. Intended use
The s88 repeater is intended for use in model railway layouts as specified in the instructions.
Any other use is not in accordance with the intended use and will result in the loss of the
warranty claim. Intended use also includes reading, understanding and following all parts of
the instructions. The s88 repeater is not intended to be used by children under the age of 14.
1.3. Safety instructions
Improper use and non-observance of the instructions can lead to incalculable hazards. Prevent
these dangers by carrying out the following measures:
Only use the s88 repeater in closed, clean and dry rooms. Avoid moisture and splash water
in the environment. After condensation has formed, wait two hours for acclimatisation
before use.
Disconnect devices that are connected to the s88 repeater from the power supply before
carrying out wiring work.
Only supply devices that you connect to the s88 repeater with extra-low voltage as
specified in the technical data. Only use tested and approved transformers for this purpose.
Only plug the mains plugs of transformers into properly installed and fused earthed sockets.
Do not expose the s88 repeater to high ambient temperatures or direct sunlight. Observe
the information on the maximum operating temperature in the technical data.
Regularly check the operational safety of the s88 repeater and the connected devices, e.g.
for damage to the connection cables.
If you notice damage or if malfunctions occur, disconnect the connection to the power
supply immediately. Send the s88 repeater in for inspection.
s88 Repeater
Getting started | 3
Advertisement
Table of Contents
