Fan Removal; Step Motor Removal - Lennox MCB Series Service Manual

5. Pull out the evapo-
rator

9.1.4. Fan Removal

NOTE: The front pan-
el, control box
and evaporator
coil must be re-
moved prior to
this procedure
1. Remove the two
screws and fan
motor fixing board.
3. Remove the fixing
screw.
4. Pull out the fan mo-
tor and fan assem-
bly from the side.

9.1.5. Step Motor Removal

NOTE: The front pan-
el, control box,
evaporator coil
and fan must
be removed
prior to this
procedure
1. Remove the
two screws,
then remove the
horizontal swing
motor.
Evaporator Coil Removal
2. Remove the bearing
sleeve.
2. Remove one screw
and then remove the
vertical swing motor.
3. Remove one screw,
then remove the ion-
izer generator.
38