Related Manuals for Amada VL Series
Summary of Contents for Amada VL Series
- Page 1 Original Instructions: German Translation of Original Instructions Pneumatic Pressure Control VL Series OPERATING INSTRUCTIONS 76609253EN-VLx-V1.4...
- Page 2 Design changes, VLD and VL19 removed Copyright 2015: AMADA MIYACHI EUROPE GmbH Lindberghstr. 1, 82178 Puchheim, Germany Right to make amendments reserved. Deviations may occur. All rights reserved. The products named in this manual are only used for identification purposes and may be trademarks or registered trademarks of the respective companies.
- Page 3 Pneumatic Pressure Control VL Contents Contents General Information ......................4 Device-Specific Hints for Operation ..................4 Technical Description ......................4 Pneumatic Pressure Control VLP ..................4 Pneumatic Pressure Controls VL, VL40, VL60 ..............4 ...
- Page 4 Pneumatic Pressure Control VL General Information General Information Information about safety regulations, copyrights, protection rights, symbols, usage location conditions, notes on resistance welding and contact addresses can be found in the annex of the operating instructions. Please read this information carefully before making yourself familiar with these device specific instructions.
- Page 5 Pneumatic Pressure Control VL Setting into operation Setting into operation If you apply a low welding pressure with high welding current, sparkling of the work pieces can appear. Therefore use protecting spectacles and protective dressing. Warning Always adjust the welding pressure to avoid possible sparkling. Setting into operation VLP In case of frequent line pressure fluctuation it is recommended to use a pressed air boiler.
- Page 6 Pneumatic Pressure Control VL Air-filter unit (Option) Air-filter unit (Option) Purification and Maintenance Operate the unit only with line supply presssure of at least 6 bar! Caution The air filter should be purified in regular time intervals. For the cleaning only neutral cleaners (warm soap water) must be used.
Need help?
Do you have a question about the VL Series and is the answer not in the manual?
Questions and answers