Advertisement
INSTALLATION GUIDE
Note: This product must be installed by a licensed plumber. This is a general installation guide - there are many factors
involved that can alter the installation method. AU/NZ: For installations within Australia and New Zealand, this product
must be installed in compliance with AS/NZS 3500. UK: For installations in the United Kingdom this product must be
installed in compliance with the Water Supply (Water Fittings) Regulations and Water Supply (Water Fittings) (Scotland)
Byelaws. Other: For installations outside these countries, this product must be installed in compliance with the standards in
your respective country.
1
Using the fixing bracket as a guide, drill holes
in desired position and insert wall plugs.
2
Remove bracket from the towel rail using the Allen key
to loosen the grub screw. Install bracket by fastening
the supplied screws into the wall plugs.
3
Place the towel rail onto the bracket and firmly
tighten grub screws using Allen key.
Important - If installing onto plasterboard please use appropriate
fixings.
Regularly clean with mild
liquid detergent or soap
and water
1 x Towel rail
2 x Fixing bracket
4 x Wall plug
4 x Screws
1 x Allen key
2 x Grub screw
DO NOT use cream
cleaners or bleach.
These substances are
abrasive
I N T E R I O R S
What's in the box
DO NOT use cleaning
pads with abrasive
surfaces as this may
scratch the material
Advertisement
