SP WC102P Instruction Manual

2 Ports USB Wall Charger

■ Features

GB
• 2 USB ports
• Smart-Detect for an optimized charging performance
• Supports single 2.4A fast charging
• Universally compatible AC 100-240V input
• Over voltage protection
• Over current protection
• Over temperature
• Short circuit protection
■

Specifications

• Input: AC 100-240V, 50-60HZ
• Output: DC 5V 2.4A 12W max.
• Dimensions: 65.0 x 56.5 x 30.4mm
• Weight: 50.0g
• Certification: CE, FCC, BSMI
• Warranty: 1year
Read the instruction manual thoroughly before use.
Keep the manual for future reference.

■ Operating Instructions

1. Plug the USB charger into wall outlet.
2. Plug the USB charging cable into the USB output port of the charger,
and then connect another end of USB cable to your devices.
3. You may refer to your devices to check the charging status.
4. When the charging is completed, unplug the USB charging cable
from the electronic device and USB charger, and unplug the USB
charger from wall outlet.
■ Caution
1. Please read and follow these instructions, and keep this manual in a
safe place.
2. Keep this product away from water and any flammable gases or liquids.
3. Handle this product with care.
4. Do not attempt to disassemble or repair this product.
5. Clean this product with only a soft, dry cloth.
6. Keep this product away from children.
WC102P
Instruction Manual