PumpSpy Sump Pump Smart Outlet Setup Instructions

PumpSpy Sump Pump Smart Outlet Setup Instructions

Advertisement

SMART OUTLET SETUP INSTRUCTIONS
2.
1.
PumpSpy
4.
3.
5.
8.
7.
RED LED
Cannot connect to Internet,
or problem detected with your
sump pump
Setting up your PumpSpy Sump Pump Smart Outlet
easy and only takes a few minutes. You should setup your outlet at a
convenient location in your home and move it to your sump pump
later. Don't worry, the Smart Outlet will remember your settings when
you unplug it.

STEP 1: Download and Install the PumpSpy App

from the App Store.

STEP 2: Open the app and create a new PumpSpy Account.

• After entering your info, press Done.
• Press the home button on your Apple device.

STEP 3: Plug in the PumpSpy Smart Outlet.

• Plug the Smart Outlet into any AC outlet.
• The LED ring will light up and turn yellow (setup mode).
• If the LED ring is not yellow, gently press and hold the button with the PumpSpy

STEP 4: Connect to the PumpSpy Smart Outlet

• On your Apple device, open Settings.
• Select WiFi.
• Select the WiFi network named "PumpSpy. "
6.
• Press the home button on your Apple device.

STEP 5: Setup the PumpSpy Smart Outlet

• Open the PumpSpy app.
• The PumpSpy app will ask your permission to send you notifications. Click OK.
• Select your WiFi network from the list of available networks.
• Enter the password for the selected WiFi network and press Done.
• A Success message will be displayed once connected. Press OK.
• The LED ring will turn green. A Green ring means the outlet is connected to
• Continue the setup process on the app by entering the location

STEP 6: Enter Alert Contacts

• On the PumpSpy App, select Contacts.
• Following the onscreen prompts, enter cell phone numbers and/or email

STEP 7: Connect Your Sump Pump to the Smart Outlet

( Refer to Owner's Manual )
STEP 8: Install the High Water Sensor ( Refer to Owner's Manual )
logo. The unit will turn yellow/enter setup mode after 3 seconds.
PumpSpy and is ready for use.
of the Smart Outlet.
addresses that should receive PumpSpy alerts.
/
WATCHING
24
7
YOUR SUMP PUMP SYSTEM
is very

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sump Pump Smart Outlet and is the answer not in the manual?

Questions and answers

Summary of Contents for PumpSpy Sump Pump Smart Outlet

  • Page 1 • The LED ring will light up and turn yellow (setup mode). • If the LED ring is not yellow, gently press and hold the button with the PumpSpy logo. The unit will turn yellow/enter setup mode after 3 seconds.
  • Page 2 • The LED ring will light up and turn yellow (setup mode). • If the LED ring is not yellow, gently press and hold the button with the PumpSpy logo. The unit will turn yellow/enter setup mode after 3 seconds.

Table of Contents