Advertisement
V
ECTOR
Modification of heating - cooling - ventilation only - automatic
Press HEAT/COOL button longer than 2 sec.
➔ SEL and H-C are displayed. You are now in Heating, Cooling and Ventilation mode. There are 5
different setting options:
Option 1: Cooling:
Option 2: Cooling with fan:
Option 3: Heating:
Option 4: Heating with fan:
Option 5: Auto operation:
Doc: 70-00-0741, Serie X2, 20190213
subjects to alteration
Cooling only. The controller remains in cooling mode
only and does not switch to heating.
The controller is in fan-only mode. The fan is controlled
according to the controller specification or setpoint. The
mechanical cooling is deactivated or is not switched to
it.
Heating only. The controller remains in heating mode
only and does not switch to cooling.
The controller is in pure heating mode. The fan is
controlled according to the controller specification or
setpoint. The mechanical heating is deactivated or is
not connected to it.
Heating and cooling change automatically as required.
This must be set with function 3FU (heating and cooling
mode).
© Vector Controls GmbH, Schweiz
www.vectorcontrols.com
X2-OPERATING MANUAL
WITH TOUCH SCREEN
H-C
H-C
01
1
H-C
H-C
H-C
SEL
SEL
0
.
SEL
SEL
Auto
Page 8
Advertisement
