Download Print this page

Victory 4x4 VTDLM Install Instructions

Download this manual

3R D GE N TACOM A

D I TC H LI GH T MO UNTS

INS TAL L I NSTRUC T ION S

Please read the mounting instructions below carefully before attempting to install.

Be sure to check out the install video on the product page, if available.

Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great off-road

products. Be sure to rate and review our product online. If you have any questions or are missing parts, please

don't hesitate to call us at 269-459-8447!

Table of Contents

Need help?

Do you have a question about the VTDLM and is the answer not in the manual?

Page 1 Be sure to check out the install video on the product page, if available. Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great off-road products. Be sure to rate and review our product online. If you have any questions or are missing parts, please...
Page 2 I NCLU D E D HARDWARE...
Page 3 I NCLU D E D PARTS...
Page 4 I NS TA LL ATI ON Start by opening up your hood and remove the (2) factory hood bolts on either side of the vehicle using a 12mm socket. Be sure to support the hood once the bolts are out as it will be free and want to fall. Be sure to do one side at a time.
Page 5 INSTA L L AT I ON Once both brackets are installed and tight, you are now ready to add the lights of your choosing and wire them how you please. There are small holes cut out into the brackets to help route and clean up your wiring with zip ties.