BASI Systems F2 System Quick Start Manual

Pilates Precision and Flow™
BASI Systems™ equipment delivers a breakthrough in precision and flow for Pilates
movement. The intelligent design of BASI Systems™ brings together over thirty years of
Pilates practice and research with the highest quality custom materials and craftsmanship.
Getting Started with your BASI Systems™ F2 System™
Welcome to the BASI Systems™ F2 System™ in your box you will find the F2 System™ set. There are two discs, to main
bodies, two handles and a smoll box that contains eight screws, two caps and a wranch.
F2 System™
There is so much to share about the innovative F2 System™! We hope that it will inspire and take your work to a new
level of form and function. Using this system, springs can be attached from different angles and resistance levels.

Using Springs

Springs can be attached as needed using the included carabiner hooks. Open a carabiner and
slip the spring though. Clip the carabiner to the desired F2 System™ position.
BASI Systems™ F2 System
The F2 System™ lies at the heart of BASI Systems™ Pilates
equipment. It offers magnificent versatility and previously
unattainable precision for spring setting angles and degree of
resistance. The levers also serve as handles for performing
weight bearing exercises, placing the wrists and shoulders in
an optimal position.
You can easily upgrade your existing BASI Systems™
equipment by adding the F2 System™. Simply remove the
cover from the pre-prepared hole and insert the socket. It is
now ready for use. We hope the F2 System™ will inspire you
to take your work to the next level.
Attach F2 System™ Base
Press the button on the F2 System™ base and slide it into the desired
equipment port. Release the button and rotate slightly until it catches one of
the angles inside the mechanism and clicks securely into place.
Attach F2 System™ Handle
Loosen the knob on the F2 System™ base and pull the knob as you slide the
handle into the base to the desired hole and position. Release the knob and
turn it clockwise to secure the handle.
Attach F2 System™ Cap
Place the cap onto the end of the handle and secure it with the wrench. This
will allow repositioning without worrying about the handle becoming
dislodged from the base.
Adjust F2 System™
The F2 System™ handle can be used in a myriad horizontal and vertical angles.
Loosen the knob and pull it as you move the handle into the desired position.
Turn the knob clockwise to tighten it.
"I see the equipment as an extension
of myself when I practice and teach,
and therefore I want it to inspire my
work, my movement and my spirit."
Rael Isacowitz, Founder BASI Pilates ®