Advertisement
Manual
Valid for
Note:
Pay attention to the correct polarity when connecting the speakers!
When connecting the speakers, make sure that the dimensions are correct.
With 100V technology, the total power of the speakers must not exceed 240 W!
With low-resistance connections, the total impedance of the loudspeakers must not be less than 4 ohms!
10.2.3. Power Saving
If "Auto" is selected as "Power Saving", the amplifier goes into stand-by mode after an extended period
(approx. 15 mins.) without an input signal.
Note:
As soon as an input signal is present again, the amplifier is reactivated.
Version (modifications reseverd)
AMP 1200
111-124-04-001-00
Seite 11 of 17
23.03.2022
Advertisement
