Connecting To A Computer; Transferring Music To Your Mp-C833 - Coby MP-C833 Instruction Manual

Connecting to a Computer

If you are using Windows 98 SE, you must install the USB driver contained
on the supplied Installation CD. Please see the USB Driver Installation sec-
tion for more information.
To connect to a computer:
1.
Make sure the player is turned off.
2.
Remove the USB Cap and plug the MP-C833 directly into your computer's
USB port. It may take Windows several minutes to recognize and set
up the device the first time it is connected depending on your hardware
configuration
Your player will be detected as a "Removable Disk" when you open

"My Computer".
You may choose to use a USB extension cable to connect to a

computer.
Transferring Music to Your MP-C
1.
Connect the MP-C833 to a computer.
2.
Open the computer's file browser (e.g., "Windows Explorer").
3.
Select the music files to transfer and drag-and-drop them onto the "Remov-
able Disk" icon that represents your MP-C833.
You may also transfer files from your MP-C833 to a computer.

Do not disconnect the MP-C833 or otherwise interrupt the file
transfer process. Doing so may corrupt your files and/or the
player's firmware.
Please refer to the documentation that came with your computer
or operating system for more information and support regarding
music transfer and file management over a USB connection.
Page 1
GETTING STARTED
Coby Electronics Corporation