Subscribe to Our Youtube Channel
Summary of Contents for Vmac A500245
- Page 1 ® Installation Manual for VMAC Accessory A500245 | A520007 Air Receiver Tanks www.vmacair.com www.vmacair.com...
-
Page 3: Table Of Contents
Completing the Installation ........18 VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... - Page 4 Copyright © 2022 VMAC Global Technology Inc. All Rights Reserved. These materials are provided by VMAC for informational purposes only, without representation or warranty of any kind, and VMAC shall not be liable for errors or omissions with respect to the materials. The only warranties for VMAC...
-
Page 5: Safety
VMAC will not be held responsible for any liability, consequential damages, injuries, loss or damage to individuals or to equipment as a result of the failure of anyone to properly adhere to the procedures set out in this manual or standard safety practices. -
Page 6: Warranty
Warranty registration for VMAC systems can be completed online or by filling in the form at the back of each system installation manual. Warranty registration must be completed and sent to VMAC at the time the system is put into service for any subsequent warranty claim to be considered valid. - Page 7 If requested, failed parts must be returned to VMAC for evaluation. 4) Dealers may login to the VMAC website to view the "VMAC Labour Time Guide" (under “Agreements”) to see the allowable warranty labour times. 5) Warranty invoices must include the Service Ticket number, VMAC System ID#, hours on the compressor, and a detailed description of the work performed.
-
Page 8: General Information
Please contact VMAC for replacement hoses and further information. Ordering Parts To order parts, contact a VMAC dealer. The dealer will ask for the VMAC serial number, part number, description and quantity. Locate the nearest dealer online at www.vmacair.com/dealer-locator or call 1-877-912-6605. - Page 9 All fasteners must be torqued to specifications. Use manufacturers’ torque values for OEM fasteners. The torque values supplied in Table 1 are intended for VMAC supplied components, or for use as a guide in the absence of a torque value provided by an OEM.
-
Page 10: Illustrated Parts List
Illustrated Parts List VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... - Page 11 1710904 HOSE, CRIMPED, 3/4” X 14.25” 1710903 HOSE, CRIMPED, 3/8” X11.75” 1750045 HOSE, CRIMPED, 1/2” X 45 3600159 VALVE, BALL, NPT-NPT, 1/2-1/2 4900167 FTG, STR, #8FJIC-1/2”MNPT VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
-
Page 12: Ptfe Tubing, Loom, And Push-To-Connect Fittings
Slide the collet out once the tube is fully inserted proper tubing cutters as side cutters will deform the tube. O-ring Figure 1 — Push-to-connect fittings VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... -
Page 13: Maintenance And Repair Safety
Use only genuine VMAC parts to maintain the system. Genuine VMAC parts are designed to work with the high pressure and heat generated by the compressor. Substituting genuine VMAC parts may void the warranty and could cause equipment damage, injury, or death. -
Page 14: Installation
Figure 2 — Spark plug wire ☐ Remove the ball valve and NPT adaptor from the WHASP Tank (Figure 3). Figure 3 — Remove ball valve (Shroud removed for clarity) VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... - Page 15 G300003 Mounting ☐ This accessory kit includes (×6) M8 x 1. 25 x 20 bolts with (×6) M8 flange nuts to mount G300003 to the A500245 / A520007 (Figure 4). Figure 4 — Mounting fasteners (G300003 only) ☐ The G300003 base plate has (×6) holes that will be used for mounting to the A500245 / A520007 (Figure 5).
- Page 16 ☐ There are (×4) 1/2 in holes in the A500245 / A520007 tank cradle base for mounting the G30 and air receiver tank assembly in its intended location (Figure 6). Figure 6 — Tank fastener and external dimensions (Dimensions in inches) ☐...
- Page 17 Drill (×4) 1/2 in holes in the surface that the unit will be mounted to and secure the A500245 / A520007 using (×4) 3/8 in bolts, washers, and locknuts (or Loctite 242) (Fasteners for mounting the A500245 / A520007 are not supplied) (Figure 6 on page 14).
- Page 18 (not supplied) (Figure 10). Air receiver tank drain cap Air receiver tank drain Figure 10 — Air receiver tank drain VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 19 ☐ Reconnect the spark plug wire. System Testing ☐ Install the VMAC Air Test Tool (A700052) onto the system. ☐ Ensure the ball valve is closed. ☐ Start the G30 and allow it to reach normal operating temperature and build to full system pressure.
-
Page 20: Completing The Installation
Once the air has been evacuated from the receiver tanks, open the drain on the receiver tank. ☐ Once all of the water has drained, close the receiver tank drain. VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com... - Page 21 Notes VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 22 Notes VMAC - Vehicle Mounted Air Compressors VMAC Technical Support: 888-241-2289 VMAC Knowledge Base: kb.vmacair.com...
- Page 24 Manufactured by ® 888-241-2289 tech@vmacair.com 877-740-3202 warranty@vmacair.com www.vmacair.com kb.vmacair.com 1333 Kipp Road, Nanaimo, B.C., V9X 1R3 Canada...
Need help?
Do you have a question about the A500245 and is the answer not in the manual?
Questions and answers