Advertisement
Quick Links
Hydraulic
Floor Jack 3 Ton
Double Pump
Mechanism
Quick start technology
ensures that after
the 1st stroke, the
hydraulic floor
jack moves up 3
times more than the
standard jack
Robust and durable
steel body provides
rigidity and stability
Swivel saddle for
convenient positioning
under the vehicle
Heavy-duty swivel rear
castors for smooth
movement and
positioning
Cushion on handle
prevents damage to
the vehicle
SPECIFICATIONS
CAPACITY
SADDLE LIFTS
SADDLE DIAMETER
SADDLE SWIVEL
OVERALL DIMENSIONS
FRONT WHEEL DIAMETER
REAR WHEEL DIAMETER
Rubber cushion on
the saddle prevents
marring of the lift
points of the vehicle
Built-in safety valve
protects against
overloading of jack at
120% of capacity
Hydraulic oil by-pass
system protects
ram from being over
extended
Complete with long
two piece handle for
ease of operation and
reduced operator
fatigue
Dimensions: (27×
13-1/2× 6-1/8) inches/
(686×330×152) mm
WARNING:
Cancer and Reproductive Harm-
www.P65Warnings.ca.gov
Complies with ASME PASE/2014 Safety Standard
Rubber cushion on
saddle prevents
marring
1
INSTRUCTION MANUAL
HT3300
Cushion on
handle prevents
damage
Double Pump Technology
ensures fast rising action
Advertisement
Summary of Contents for Eisen HT3300
- Page 1 INSTRUCTION MANUAL Hydraulic HT3300 Floor Jack 3 Ton Rubber cushion on Double Pump the saddle prevents Mechanism marring of the lift Quick start technology points of the vehicle Cushion on ensures that after handle prevents the 1st stroke, the Built-in safety valve damage hydraulic floor...
-
Page 2: Safety Information
SAFETY INFORMATION moving parts, any broken parts or mounting • Follow workshop health & safety rules, fixtures; and any other condition that may regulations and conditions when using the floor jack. damaged should be properly repaired or • This is a lifting device only. Do not use it for replaced by a qualified technician. -
Page 3: Maintenance
• Begin lifting by pumping the handle up and • Pump the handle until the lift arm (8) reaches down. maximum height and continue to pump • Lift Handle Assembly as high as clearance several times to remove trapped air in the allows. -
Page 4: Exploded View
EXPLODED VIEW 35 36... -
Page 5: Troubleshooting
PART LIST REF NO. PARTS DESCRIPTION QTY. REF NO. PARTS DESCRIPTION QTY. ø18, C ring Screws M5*15 ø18 Washer Pull-Rod Front Wheel Safety Head Left Shaft unit Cover Rod Link Power unit SPINDLE M12 Handle Bolt Right Shaft unit Handle Socket LIFT ARM Roller ø16, C ring...