Stid ARC-W45-G/U04-5AA1 Installation Instruction

UHF
Desktop Reader
Installation instruction
ARC-W45-G/U04-5AA1: 865 - 868 MHz
ARC-W45-G/U04-5AA1M: 865.7 MHz Morocco
Communication: USB
Cable output: USB 2.0 cable – Length 1.50 m / 4.9 ft – Connector type A
Direct Current
:
Windows ≥ 10:
Windows automatically detects the reader as a 'USB COMPOSITE DEVICE' and installs the driver.
Windows < 10: the driver is automatically installed with a STid Software, if no STid software are installed:
- Contact support@stid.com
- Connect the reader to the USB port COM of PC.
- Copy the 2 files in the directory: C:\Windows\INF.
Bidirectionnal: by default, the reader is delivered in bidirectional SSCP mode. More details about reader communication are
available in the protocol specification: Spec_Protocole_SSCP_UHF_INDUS-Vx.x.
Keyboard emulation: the reader can be used in keyboard emulation: wedge mode. See Configuring the reader in Wedge
mode.
The readers can be configured with STid -USB Wedge Configuration tool available on download link:
https://stid.com/images/UWedgeConfv110_setup.zip
In this mode the reader emulates a keyboard and displays in the active window the characters received from the
serial link.
The reader is delivered with the default parameters in bold in the table.
1- Set the options needed (if different than the defaults).
2- Send the 'Keyboard emulation ON' command.
Command
Update
Language (set)
Type case (set)
Numlock (set)
Info (get)
Timing (set)
Carriage Return (set)
SOF (set)
EOF (set)
Reset to default
EPC Private key (set)
Keyboard emulation
(set)
STid reserves the right to make change without notice, for the purpose of product improvement.
UHF
Lecteur de table
Notice d'installation
to obtain the 2 drivers files:
Configuring the reader in Wedge mode
Description of the command
Put the converter in update mode.
Changes the keyboard layout.
Chooses whether the alphabetical characters
are displayed on the screen in uppercase or
lowercase.
Chooses which numerical keys are used: those
on the numerical keypad or those above the
alphabetical keys.
Shows the current configuration (version, baud
rate, etc.).
Define the time between the sending of 2
characters.
Switches the carriage return off or on or on with
release before key pressed.
Add the character " – " at the beginning of the
frame.
Add the character " . " at the end of the frame.
Set the reader to factory default.
Set the user ID security reading mode.
Enables / disables keyboard emulation mode.
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1148C04- Page 1 sur 7 - Ed. 04/01/2023
UHF
Lector de mesa
Procedimiento de instalación
conforme con NOM-024 -SCFI-2013
US
Product references
ARC-W55-G/U04-5AA1: 902 - 928 MHz
ARC-W55-G/U04-5AA1AU: Australia
ARC-W55-G/U04-5AA1NZ: New Zealand
ARC-W55-G/U04-5AA1PE: Peru
ARC-W55-G/U04-5AA1PH: Philippines
Characteristics
Driver installation
cdc.cat fsl_ucwxp.inf
and
Communication
.
Options
The file firmware.bin
supplied by STid.
- Français (AZERTY)
- English (QWERTY)
- Uppercase
- Lowercase
- On (use numeric pad)
- Off (use keyboard nb)
Between 20ms and 1s
- Off
- On
- On + Released
- Off
- On
- Off
- On
- Plain
- Enciphered + value Private
key
- Off (disable)
- On (enable)
is