Compumedics Somfit Quick Start Manual

Defining Sleep Signals
Star t Here
Contents
®
x1 x1
Somfit® Device Charging Cradle
x 1 x1
Electrode Power Adaptor
Download
Somfit® APP
www.somfit.com
Install App and follow your Somfit® Providers
instructions to login.
®
®
BEFORE USE
Charge the Somfit® – prior to using, insert
Somfit® into the USB charging cradle provided.
SKIN
PREP PAD
x 1
PREPARE FOREHEAD
x1
USB Cable
Step 1.
Wash forehead using water
only without soap or cleansing
products. Dry with towel.
Clean your forehead area
with the Skin Prep Pad for
at least 15 seconds to give
the best signal quality.
Dry your forehead with a clean
towel, to ensure the forehead is
fully dry before applying the electrode.
Quick Start Guide
Flashing blue light
Charging
Blue light on
Indicator Light Fully charged
Important
!
Step
Step 2.
®
APPLY SOMFIT
Attach the Somfit® device to the electrode
ensuring all 3 snap-ins are in place.
Indicator Light
FRONT
Peel Slowly
BACK
Slowly remove the clear backing from the electrode to
reveal the adhesive area. Minimise touching the adhesive
area and avoid any finger contact with the three circular
gel areas of the electrode.
While looking at a mirror, apply
the electrode to the centre
of the forehead approximately
one finger's width above
the eyebrows.
Place the centre part of the
electrode on the skin first and
firmly press on the Somfit.
While pressing on the device,
slowly run your fingers along
the electrode from the centre
towards the two ends to
ensure firm placement.
Single green light
blinking every
10 seconds
Ready to record