Advertisement
Operating Introduction
Control panel
Tank full
Defrost
Operation
1 Plug into power socket and then press the "ON/OFF" button to turn
on the unit. The machine start up automatically and the unit is in the
status of constant dehumidifying.
2
Press the "HUMID" to set desired humidity 40%→50%→60%→CO .
CO is indicated a continuous dehumidification, dehumidification
equipment without humidity setting , no humidity control
If the humid reduce to the setting humidity ,the machine will stop
automatically.
Example: in the dehumidification operation:
Set the 50%--- expectations of environmental humidity value is 50%,
when the appliance detects that the current environment humidity is
higher than or equal to 52%RH, the appliance start; when the appliance
HUMID
Humid
- 5 -
Timer
Timer
Power cord
Advertisement
