Getting Ready; Loading The Battery - Microtek Take-it 350 User Manual

Getting Ready

BATTERY
COMPARTMENT
LOCK
_ _ _ _ _
+ + + + +
Correct battery polarity at outer end of
the compartment are indicated at the
back of cover or as illustrated above.
LIFT away
from the
camera to
unlock
Slide toward
arrow
direction to
open
+ + + + +
_ _ _ _ _
A. Loading the Battery
(4 AAA size batteries, Alkaline recommended)
1 Unlock the battery compartment cover by
sliding its lock toward "OPEN" position.
2 Slide compartment cover outward (as
indicated by the arrow shown on top of the
cover) and open the cover.
3 Insert each of the 4 AAA batteries into its
chambers making sure that the positive (+)
and negative (-) ends are properly oriented
with the polarity indicated on top of each
chamber and at the back of the cover.
4 Close and slide the battery compartment
cover back to its original position and lock
the cover.
WARNING : When the LCD Panel display
starts to blink, it indicates that the batteries
power is low. Stop taking pictures and transfer the
images data to your PC within a week before the
batteries completely lose its power. Otherwise, all
the images will be erased.
4