Putting into operation / USB sockets / Car sockets / Safety fuse 3. Putting into operation Before use, make sure that your car’s on-board voltage matches the product specifications. Connect the device “A” part to your car socket. Attach the device “B” part to a location in your car where it will not pose danger do driving and will not become loose and cause injury to people in case of an impact.
Technical specifications 7. Technical specifications Charging and power supply 4x USB-A output 3x 12V output Specifications 2x USB-A - 5V/2.4A 2x USB-A - 5V/1A DC 12V - 120W max. / DC 24V - 200W max. Maximum USB output current 5V / 4A (simultaneously) Display Battery voltage indicator (9V - 30V) Warning indication (flashing display)
Page 6
INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING MATERIALS Dispose of used packaging material at a site designated for waste in your municipality. DISPOSING OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste.
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor. for detailed information about authorized service centers. EN 7 2021...