Advertisement
Quick Links
ZP-NE14-S (sPoE)
How to Repair The Cable on a Simplified POE
Camera
**Warning** Cutting the end off of a camera or cable will VOID
the warranty on that item. **Warning**
**if your cable end is defective this is covered under warranty, create your
warranty online at
http://www.zmodo.com/rma
or contact our support department**
The cable pinout on the Simplified POE camera is different from the stanrard LAN
cable because only four out of the eight cables within the LAN cable are actually
used.
If the cable on the camera is damaged and needs to be replaced, please use the
diagrams above to model how to reinstall the cables into the pin positions.
Page 1 / 2
(c) 2023 Jeremy Schultz <itmanager@eptco.com> | 2023-01-06 10:46
URL: https://kb.zmodo.com/index.php?action=artikel&cat=164&id=333&artlang=en
Advertisement
Related Manuals for ZMODO ZP-NE14-S
Summary of Contents for ZMODO ZP-NE14-S
- Page 1 ZP-NE14-S (sPoE) How to Repair The Cable on a Simplified POE Camera **Warning** Cutting the end off of a camera or cable will VOID the warranty on that item. **Warning** **if your cable end is defective this is covered under warranty, create your warranty online at http://www.zmodo.com/rma...
- Page 2 ZP-NE14-S (sPoE) Pins 1 and 6 are power, pin 1 is negative and pin 6 is positive. Pins 2 and 3 transmit data to and from the camera. **Please do not use this diagram to create a pinout for a separate power source for the Simplified POE cameras.