Table of Contents
Advertisement
Quick Links
AI Station 2 User Guide
Introduction
The EchoNous AI Station 2 is a stand that lets you easily mount and remove
Kosmos Bridge for mobile use.
Use this guide in conjunction with the following documents that come in the
box with the AI Station 2 (you can also find them on the USB flash drive):
•
AI Station 2 Installation Guide, Core Stand
•
AI Station 2 Installation Guide, Kosmos Bridge Mount
Installing and removing Kosmos Bridge
Installing Kosmos Bridge on the AI Station
Ensure the latch is fully closed so Kosmos Bridge does not fall out and
cause injury or damage.
To install Kosmos Bridge on the AI Station:
Align Kosmos Bridge so that the bottom edge rests on the corner tabs of the
1.
tablet mount.
EchoNous AI Station 2 User Guide
1
Advertisement
Table of Contents
Related Manuals for EchoNous AI Station 2
Summary of Contents for EchoNous AI Station 2
- Page 1 Kosmos Bridge for mobile use. Use this guide in conjunction with the following documents that come in the box with the AI Station 2 (you can also find them on the USB flash drive): • AI Station 2 Installation Guide, Core Stand •...
- Page 2 • Press the release button quickly and completely – this ensures the USB cable properly releases. To remove Kosmos Bridge from the AI station: Make sure that Kosmos Bridge is facing straight forward and not tilted downward. EchoNous AI Station 2 User Guide...
- Page 3 Locking the release button (optional) If you want to keep Kosmos Bridge in the AI Station, you can lock the release button to ensure the latch does not open. To lock the release button: EchoNous AI Station 2 User Guide...
- Page 4 If the mount is too loose or too tight, you can adjust it as described in the AI Station 2 Installation Guide, Kosmos Bridge Mount. Be sure to support the tablet while adjusting the tension; if the tension is too loose, the tablet mount could suddenly tilt down. EchoNous AI Station 2 User Guide...
- Page 5 While scanning with Lexsa, do not disconnect the AC power if it is already connected. The enclosure box should not be open while in the patient environment. Below are instructions on how to set up Kosmos Hub and the Kosmos Hub with the Lexsa grab-and-go feature. EchoNous AI Station 2 User Guide...
- Page 6 Kosmos Lexsa Cable Power Supply Cable Cable that connects to Kosmos Bridge (USB-C) Reference the image above when installing the Hub Connect Kosmos Lexsa Connect the Hub power supply cable Connect the Hub to Kosmos Bridge EchoNous AI Station 2 User Guide...
- Page 7 Kosmos Bridge (USB-C) Reference the image above when installing the Hub with the Lexsa grab-and-go feature Connect Kosmos Lexsa to the exterior port Connect the Hub power supple cable Connect the Hub to Kosmos Bridge EchoNous AI Station 2 User Guide...
-
Page 8: Locking The Casters
The AI Station is designed to roll freely; however, after you have placed it where you want, lock the casters so it does not unintentionally move. To lock a caster, use your foot to push down on the tab. EchoNous AI Station 2 User Guide... -
Page 9: Cleaning And Disinfecting
Never submerge or allow liquids to enter the mounting assembly. Wipe any cleaning agents off the mounting assembly immediately using a water- dampened cloth. Dry the assembly thoroughly after cleaning. EchoNous AI Station 2 User Guide... -
Page 10: Specifications
Kosmos Hub • Dimensions: 100 x 116 x 30 mm Power Supply • Input: 100-240V AC supply 50-60Hz • Output: 5.0V ±0.25V at 2.0A maximum current Hub to tablet cable length • 1800 mm (70.9”) EchoNous AI Station 2 User Guide... -
Page 11: Labeling Symbols
Part 1: General requirements Batch code Batch code Ref. No. 5.1.5 ISO 15223-1 Medical devices - Symbols to be used with medical device labels, labeling and information to be supplied - Part 1: General requirements EchoNous AI Station 2 User Guide... - Page 12 Safety warnings are General warning sign identified with this mark on Ref. No. D.2-2 the device. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance EchoNous AI Station 2 User Guide...
-
Page 13: Contact Information
EchoNous Inc. 8310 154th Avenue NE Building B, Suite 200 Redmond, WA 98052 Technical Support (toll free): (844) 854 0800 Sales (toll free): (844) 854 0800 Email: support@EchoNous.com Website: www.EchoNous.com P006266-004, Rev A March 2022 EchoNous AI Station 2 User Guide...